how to open a garage door with a broken spring

Fix Garage Door: DIY Guide to Open it with Broken Spring

By John Martinez
AD

Garage door springs can wear out over time, causing your door to malfunction. If you're finding it challenging to open your garage door, don't let a broken spring leave you stranded. With a few tools and some basic knowledge, you can get your garage door open again in no time. Let's dive into the process of how to open a garage door with a broken spring.

Before we start, remember safety first. Broken garage door springs can be dangerous. Ensure you follow all safety guidelines and only proceed if you're comfortable with the process. If you're unsure, don't hesitate to call a professional garage door repair service.

Understanding Your Garage Door Springs

Garage doors use two main types of springs: extension springs and torsion springs. Understanding which type of spring you have is crucial for deciding how to approach the issue.

AD
a man in blue overalls working on an electrical device
a man in blue overalls working on an electrical device
a large metal object mounted to the side of a wall next to a garage door
a large metal object mounted to the side of a wall next to a garage door
Awww, Snap! Do I Have a Broken Garage Door Spring?
Awww, Snap! Do I Have a Broken Garage Door Spring?

Extension springs are located along the horizontal tracks and stretch as the door moves down. Torsion springs are located above the garage door and twist as the door moves. Most modern garage doors use torsion springs, which are typically stronger and safer than extension springs. Regardless of the type, if your garage door has a broken spring, it won't open properly.

Identifying a Broken Spring

Look for visible gaps, bent or broken pieces, or coils that no longer connect to the cable. If the spring is broken, you'll likely hear a loud, sudden snap or see the door looking uneven or sagging. If the door only drops a few inches when you release it, or if it appears off-balance, these are signs that one or both of your springs have broken.

How to Open a Garage Door With a Broken Spring
How to Open a Garage Door With a Broken Spring
an overhead garage door is open to show the inside
an overhead garage door is open to show the inside

To confirm, try manually lifting the garage door. A broken spring will make this task significantly more challenging. Keep in mind that opening a garage door with a broken spring should only be done in an emergency, as it can be dangerous.

Gathering Your Tools

Before you begin, make sure you have the right tools for the job. If you plan to temporarily open your garage door until you can arrange a professional repair, you'll need:

AD
  • A ladder
  • Adjustable wrench
  • Vice grips or a locking pliers
  • Socket wrench
  • Towel or piece of cloth

For a permanent fix, you'll also need replacement springs, which can be purchased at a hardware store or ordered online. Be sure to choose the correct spring for your garage door, as they can vary by size and type.

Temporarily Opening Your Garage Door

If you only need to open your garage door once or twice to retrieve something, you can temporarily bypass the broken spring. This method works best for torsion springs.

First, manually move the garage door to the open position, using muscles and brute force. If the door is too heavy, ask for assistance to avoid injury. Once the door is open, use a locking pliers or a piece of wire to secure the door in the open position. This will prevent the door from suddenly closing, which can be dangerous.

AD

Opening the Garage Door with a Locking Pliers

Insert the locking pliers into the hole of the shaft by the cone and adjust the pliers to fit firmly. Turn the pliers slightly to release the tension safely. In case the door drops suddenly, be ready to move quickly to prevent any injuries.

With the torsion spring released, lower the garage door by lifting the handle. Once the door is closed, use the locking pliers to secure the door in the open position again. This will allow you to use the garage door temporarily until a professional repair can be scheduled.

Opening the Garage Door with a Wire or String

Alternatively, you can use a small piece of wire or string to release the tension from the torsion spring. Slide the wire or string into the drill point (the set screw hole) on the torsion tube. Twist the wire or string to release the tension gradually and lower the garage door. Once the door is open, secure it in the open position using the wire or string to keep it from closing.

AD

Again, this is a temporary solution. The garage door will only remain open until the wire or string is removed. Be sure to label the lever or remember which way you turned the spring to release the tension, as you'll need to repeat the process in reverse to close the door.

Permanently Repairing the Broken Spring

If you require a permanent solution, you'll need to replace the broken spring with a new one. This process involves more steps and can be more complicated than the temporary fixes mentioned earlier. It's recommended to call a professional for this task, but if you're feeling adventurous and want to tackle the project yourself, follow these general steps:

Safety First: Disconnect the Garage Door Opener

First, disconnect the garage door opener from the power source to prevent the opener from accidentally engaging while you're working. Look for the emergency release handle connected to the door, usually above the door tracks. Pull the red rope or handle to disengage the door from the opener.

Next, support the door with a ladder or a vise grip attached to the track to keep it from moving unexpectedly. Place the ladder underneath the door and brace it against the wall or ceiling for stability.

Removing the Broken Spring

Use an adjustable wrench to loosen the winding cone from the torsion tube. Disconnect the spring from the cable by gently pulling the cable towards the wall and unscrewing the Setscrews on the right side of the torsion tube. The Setscrews secure the cable to the spring bracket.

After removing the cable, carefully lower the drum and unscrew the Setscrews that secure the spring to the spring bracket. Remove the broken spring from the torsion tube and set it aside for disposal. Always double-check that the spring is fully disengaged and secure before proceeding.

Installing the New Spring

Measure and cut the new spring to match the size of the old one. Install the new spring onto the torsion tube, ensuring it's secured properly with the Setscrews. Reattach the cable to the spring bracket and the drum, tensioning the cable as you go. Turn the torsion tube clockwise to wind the new spring, using a socket wrench.

Once the door is balanced and opening smoothly, reconnect the garage door opener and remove the vise grips or ladder supports. Test the door fully by opening and closing it a few times to ensure it's working correctly.

Garage door spring replacement can be a complex task, and even experienced DIYers might find it challenging. If you're unsure about any step, don't hesitate to call a professional garage door repair service. Regular maintenance can help prevent spring breakages, so don't forget to inspect and lubricate your garage door springs periodically.

In the meantime, if you're looking for a reliable, trustworthy, and efficient garage door repair service, consider reaching out to a local professional. They can provide expert advice, perform a thorough inspection, and ensure your garage door is working safely and smoothly in no time. Don't let a broken garage door spring leave you stranded – take control and get your door working like new again today!

AD