how to mount downriggers

How to Mount Downriggers: A Step-by-Step Guide

By John Lopez
AD

Mounting downriggers on your boat can significantly enhance your fishing experience by allowing you to reach deeper waters. Whether you're targeting salmon, tuna, or other deep-water species, this guide will walk you through the process of installing downriggers step-by-step. Let's dive in! Before we start, ensure you have all the necessary tools and materials: boat downrigger kit, drill, screwdriver, tape measure, marker, and safety glasses.

First, let's understand the anatomy of a downrigger: it comprises a downrigger bracket, boom, cable, weight, and release clip. Familiarizing yourself with these components will make the installation process smoother.

Preparation and Measurement

The first step is to measure and mark where you'd like to mount the downrigger on your boat's gunnel. Most downriggers are mounted on the gunnel, but they can also be mounted on the transom or under the gunwale.

AD
DIY - Making a Downrigger
DIY - Making a Downrigger
Learning How to Use a Downrigger
Learning How to Use a Downrigger
a boat parked in front of a house next to another boat on the back of it
a boat parked in front of a house next to another boat on the back of it

Use your tape measure to determine the centerline of your boat. This will help you align the downrigger kit symmetrically. Mark the measurement with a pencil or maker pen.

Mounting the Downrigger Bracket

Now that you have your measurements, it's time to mount the downrigger bracket. The bracket is typically made of aluminum or stainless steel and serves as the base for the downrigger boom.

Professional looking DIY Downriggers For Under $50 Each!: How To - Step By Step!!!
Professional looking DIY Downriggers For Under $50 Each!: How To - Step By Step!!!
Best Downrigger Mounts: Top 9 Picks According to Experts
Best Downrigger Mounts: Top 9 Picks According to Experts

Drill holes at the marked spots, making sure they're large enough to accommodate the provided screws or bolts. Position the bracket onto the gunnel, align it with the holes, and secure it tightly using the provided hardware. Ensure it's level to maintain the balance of your boat.

Attaching the Downrigger Boom

The boom is an essential component that holds the cable and weight. Attach it to the bracket by sliding it through the sleeve and securing it with the set-screw provided in the kit. Make sure it's tightly attached and firmly in place.

AD

Next, thread the cable through the boom. Ensure the cable is fully extended, and there's no slack. Now, you're ready to attach the weight and release clip. These components help control the depth at which your bait is positioned.

Installing the Cable and Weight

Feed the cable through the boom and secure it to the bracket using the cable clamp. Trim the excess cable if necessary. Now, attach the weight to the end of the cable. The weight is usually}' a cylindrical object, designed to sink your bait to the desired depth.

Next, attach the release clip to the cable. This clip allows you to quickly release the line when you've caught a fish. Make sure it's securely fastened and in line with the weight.

AD

Routing the Cable

Route the cable from the boom to the rod holder or fishing rod. Ensure it's not too tight or too loose; this could potentially damage the cable or make it difficult to control your bait.

As a safety precaution, use cable ties or tubing to protect the cable from sharp edges or points. This will also prevent it from chafing against the boat's surface, which could lead to fraying or breakage over time.

Testing Your Downrigger

Before you head out on your fishing trip, test your downrigger to ensure it's functioning correctly. Lower the weight to the desired depth, then retrieve it. Repeat this process a few times to ensure the cable is running smoothly and the weight is dropping and retrieving without any issues.

AD

Also, check that the release clip is working properly. This will save you time and effort when you're out on the water, trying to catch that big one!

Congratulations, you've successfully mounted your downriggers! Now you're ready to explore the depths and land that trophy fish. Always remember to maintain your downriggers regularly to ensure they remain in optimal condition. Happy fishing!

AD