how to mix metal guitars

Mastering Metal Guitar Mixing: Expert Techniques Revealed

By Laura Martinez
AD

Mixing metal guitars involves a complex blend of techniques, effects, and overall tone that sets the genre apart. Achieving that signature heavy sound requires understanding and balancing various aspects, from distortion and EQ to guitar and amp selection. Let's dive into the world of metal guitar mix engineering.

Metal guitar mixing is a vast topic, but we'll focus on key elements to create a powerful, Definition While the genre spans substyles like death, thrash, and progressive metal, many principles apply across the board.

Guitar Tracking and Recording

Metal guitar tracking often involves layering multiple guitar tracks to create thick, dense textures. This can include rhythm tracks, lead tracks, and harmonized layers. Recording these with proper mic placement and high-quality gear is crucial.

AD
an info sheet describing the different types of amps for guitar strings and how to use them
an info sheet describing the different types of amps for guitar strings and how to use them
How To Make An Electric Guitar Sound Metal (For Different Styles)
How To Make An Electric Guitar Sound Metal (For Different Styles)
Decoding The Mix #7 - All-Star Collaboration
Decoding The Mix #7 - All-Star Collaboration

Consider close-miking with dynamic or condenser microphones to capture both the amp's natural resonance and the guitarist's grit. Room mics can add depth and ambiance, but be cautious of phase issues.

Amplifiers and Cabinets

Choosing the right amp and cabinet is governing metal tones. High-gain amps with aggressively voiced preamps and power sections are standard, such as boutique amps designed for similarly iconic amps like the Mesa Boogie Dual Rectifier or Marshall JCM800.

an info sheet showing the different types of rock and heavy metal instruments in each volume
an info sheet showing the different types of rock and heavy metal instruments in each volume
Tips for Mixing Guitars
Tips for Mixing Guitars

Eminent guitar cabs for metal include closed-back models, which provide tighter, more aggressive low-end, like the Marshall 1960A or the Orange Cab OBC410. Consider recording with the amp's natural speaker cabinet but supplement with DI or other amp simulation options for flexibility in mixing.

Effects

Effects play a significant role in shaping metal tones. Distortion, overdrive, and fuzz pedals are cornerstones, providing the heavy crunch or saturated clean needed for leads and riffs. Multi-effects units and amp sims can also help achieve coveted metal tones.

AD

Other essentials include delay and reverb for creating space and depth, wah-wah for expressive leads, and chorus or phaser for modulation. Ensemble effects can thicken layers, while octave or harmonizing pedals can create unique textures. Locate these effects before the amp's input for most authentic saturation.

Mixing Techniques

Once recorded, metal guitar tracks should be EQ'd, compressed, and panned to create a powerful yet well-defined sound. Here are some key mixing techniques:

EQ: Use EQ to accentuate the agreeable transient attack and sustain of guitar riffs while smoothing any harsh frequencies. Common cuts include honking mid-range around 300-500Hz and scooping midrange around 700-1000Hz. Boosts in the low-end around 100-200Hz and high-end around 3-6kHz can add thickness and cut, respectively.

AD

Compression

Compression is vital for taming dynamics and shaping sustain. Slow attack settings can help retain initial transient snap while fast release settings manage amplitude. Low to moderate ratios, around 3:1 to 6:1, and careful makeup gain control can help achieve controlled swells without flattening the life from the performance.

Panning and Depth: Pan metal guitar tracks hard left and right to create a sense of width, but avoid sending them too far out to retain presence in the stereo spectrum. Use stereo effects like reverb or spatial spread plugins to create depth, keeping the main signal in the center while adding width to backing tracks or harmony layers.

Layering and Doubling

Layering and doubling guitar tracks can enhance thickness and depth. Meticulously aligned and tuned tracks can create a wall of guitar sound, while slightly detuned and offset tracks can add harmonic richness. Deliberate automation of volume, panning, or effects can bring elements in and out of the mix for added interest.

AD

Metal guitar mixing is an art that combines technical expertise with artistic sensibility. By understanding your tools and approaches, you can unlock powerful and emotive tones that drive the genre. So plug in, turn up, and let the heaviness commence!

AD