how to measure angles with a speed square

How to Measure Angles with a Speed Square

By John Thomas
AD

If you're a do-it-yourselfer, carpenter, or any trade that involves woodworking, measuring angles accurately is crucial. The speed square, a versatile tool, can help you measure and transfer angles quickly and precisely. Here's how to measure angles with a speed square.

Before we dive in, ensure your speed square is in good condition. The blade should be straight, and the face should be flat. A well-maintained speed square ensures accurate measurements.

Understanding Your Speed Square

To measure angles effectively, you need to understand the markings on your speed square. The most common type is the 16-inch speed square, with markings in inches, fractions of inches, and degrees. The blade has two ends: the 90-degree end and the 45-degree end.

AD
HOW TO USE A SPEED SQUARE FOR BEGINNERS
HOW TO USE A SPEED SQUARE FOR BEGINNERS
How to Use a Speed Square for Angles
How to Use a Speed Square for Angles
how to find the angle with a speed square on a wood table and text overlay that reads, how to find the angle with a speed square
how to find the angle with a speed square on a wood table and text overlay that reads, how to find the angle with a speed square

Additionally, you'll see hole marks at various angles along the blade. These are for marking your board at specific angles using a knife or pencil.

Measuring 90-Degree and 45-Degree Angles

Measuring 90-degree and 45-degree angles is straightforward. Align the blade of your speed square flush with the edge of your board. For a 90-degree angle, align the blade with the edge you want to cut and ensure the square portion of the blade is against the board's face. For a 45-degree angle, use the 45-degree end of the blade.

How To Use A Speed Square To Mark Angles
How To Use A Speed Square To Mark Angles
a person holding a metal triangle with the words finding angles with a speed square on it
a person holding a metal triangle with the words finding angles with a speed square on it

With both settings, mark along the edge of the square using a pencil or knife. These are your cut lines for square (90 degrees) and miter (45 degrees) cuts.

Measuring Angles Other Than 90 and 45 Degrees

For angles other than 90 and 45 degrees, use the hole marks along the blade. These hole marks correspond to specific angle measurements, typically every 15 degrees. To measure an angle, align the hole that corresponds to your desired angle with the edge of your board.

AD

For example, if you want to measure an angle of 60 degrees, align the hole marked '45' with the edge of your board. This is because the angle you're measuring includes the previous 45-degree angle. Mark along the edge of the square as before.

Transferring Measured Angles

Once you've marked your angle, you can transfer it to another piece of wood. Use your speed square to draw the angle on the second board. Align the edge of the board with the marked angle on the speed square and draw along the blade.

Alternatively, you can use the hole marks to transfer angles. Align the hole with the angle you've marked on your board, then draw the angle by turning your speed square on the board's face.

AD

Practice makes perfect when it comes to measuring angles with a speed square. The more you use it, the more intuitive it becomes. Soon, you'll be accurately measuring and transferring angles in no time. Happy woodworking!"

AD