How to Make a Squeegee
Ever found yourself in need of a squeegee for a quick window cleaning or a graphics project, only to realize you're out of stock? Why not make your own? It's simpler than you think, and you might even have the materials lying around your home. Let's dive into how to make a squeegee that suits your needs.
Before we start, gather your materials. For a basic squeegee, you'll need a long, narrow piece of flexible rubber, such as an old rain boot sole or a rubber sheet from a worn-out tired; a sturdy handle, like a wooden dowel or a broom handle; sharp scissors or a craft knife; and strong adhesive or a Naw hazards for attaching the rubber to the handle.
Selecting Your Rubber
Choose a rubber that's flexible yet sturdy, as this will give your squeegee the ideal combination of flexibility and durability. avoid using thin or rigid rubber, as it won't provide the necessary give for an effective squeegee.
For a standard-sized squeegee, cut a strip about 2 to 3 inches wide and long enough to cover your handle with some excess for grip. You can adjust the size based on your needs, but keep in mind that a narrower squeegee might be too flimsy, while a wider one could be too rigid.
Using an Old Rain Boot Sole
If you have an old rubber rain boot, don't toss it just yet. The soles make excellent squeegee material. Carefully cut out a strip of the desired size using sharp scissors or a craft knife. Be sure to wear safety gloves to prevent any accidents.
To extend the life of your homemade squeegee, consider adding a layer of protection to the rubber. Simply apply a thin coat of clear nail polish to the edges and Let it dry. This will seal the rubber and prevent it from drying out and cracking over time.
Using a Rubber Sheet from a Tire
If you have access to a rubber sheet from an old tire, you can use it to make a durable squeegee. Follow the same sizing and cutting process as with the rain boot sole. Ensure you're using a clean, debris-free section of the tire to avoid any contamination.
Once you've cut your rubber strip, you can move on to attaching it to the handle. If you're using a blunt implement like a wooden dowel, you might want to sand the edges to ensure a smooth, snag-free surface.
Attaching the Rubber to the Handle
Now that you have your rubber strip, it's time to attach it to your handle. Make sure your handle is clean and dry to ensure a strong bond. If you're using adhesive, apply it evenly along one edge of the rubber strip and the corresponding area on your handle. Press them together firmly, ensuring no air bubbles form. Wrap the excess rubber around the handle and secure it with additional adhesive or clamps if needed.
If you're using a bolt for attachment, drill a hole through the rubber and the handle, ensuring they align perfectly. Secure the bolt with a nut and washers, then tighten it firmly. Make sure the rubber has enough play to flex but not so much that it wobbles.
Test Your Squeegee
Before you put your squeegee to heavy use, test it on a small, inconspicuous surface to ensure it's working as expected. Make any necessary adjustments, such as trimming the rubber or tightening the attachment.
With a little DIY ingenuity and some basic materials, you can create a squeegee that suits your needs perfectly. Try out different sizes and rubber types to find the combination that works best for you. Happy squeegeeing!