Shrink Shorts: How To Make Your Denim Fit Tighter
Do you find your shorts sliding down or feeling too baggy? Tailoring your clothes can significantly improve your appearance and comfort. Learning how to make shorts fit tighter doesn't require a trips to the tailor or expensive alterations. With a few simple adjustments and some essential tools, you can customize your shorts for a perfect fit.
Before you start, gather some basic sewing supplies like a needle, thread in a matching color, a seam ripper, and pins. Also, have your iron and a measuring tape ready. These tools will help you make precise alterations for a comfortable, tailored fit.
Adjusting the Waistband
The waistband is often the culprit behind loose-fitting shorts. By adjusting this area, you can significantly improve the fit.
First, try adjusting the button or zipper. If your shorts have a button closure, buttons that are too loose can cause the shorts to gap at the waist. Conversely, if a zipper is too tight, it can dig into your skin and cause discomfort. For a balance, aim to have a ½ to 1-inch gap at the waist when fastened.
Narrowing the Waistband
If your shorts still feel too loose, consider narrowing the waistband. Carefully use a seam ripper to remove the side seam of the waistband. Work slowly and carefully to avoid damaging the fabric. Once open, lay the shorts flat and press the waistband in half lengthwise with a steam iron. Then, press the edges towards the center to create a new seam that's ½ to 1-inch narrower. Stitch the new seam closed.
For a more fitted look, you can also adjust the waistband's elastic. If your shorts have an elastic waistband, carefully remove the old elastic, and replace it with a narrower piece. This can help cinch your waist and make the shorts fit more snugly.
Adding Darts
If your shorts are still too baggy after adjusting the waistband, consider adding darts. Darts are folds of fabric that help shape and reduce the bulk of clothing. To add darts, first decide where you want them - commonly, darts are placed at the side seams or at the front and back seams. Use your body as a guide, marking where you want the dart to end. Pinch the fabric at this point and mark how wide you want the dart to be at the base.
Use your seam ripper to carefully create an opening along the dart lines. Then, fold the fabric along the darts, using your markings as guides. Stitch the darts closed, ensuring that you keep the edges aligned to avoid distortion. After stitching, press the darts towards the body to ensure they lay flat.
Adjusting the Length
Too-long shorts can also contribute to a sloppy fit. By adjusting the length, you can create a more flattering, tailored look.
First, decide how much length you want to remove. Hold the shorts up to your body and mark where you want the new hem to be with a fabric marker or tailor's chalk. Be sure to account for any existing hems – you may need to add new hems after you've shortened the shorts.
Shortening the Legs
To shorten the legs, try on your shorts and mark where you'd like the new hem to fall. Remove the existing hem, then fold up the fabric to your desired length. Use pins to hold the new hem in place, ensuring that the sides are even. Stitch along the raw edge, using a sewing machine or hand-stitching for a neater finish. If desired, fold the hem over once more and stitch again for a wider hem.
Alternatively, you can use a simple fold-over hem. Fold the raw edge over once, then fold it over again. Stitch close to the raw edge to create a clean, narrow hem. This method works best for simple, less-fussy fabrics.
Adjusting for Tapered Legs
Some shorts are cut to be too straight, which can make your legs look wider. To create a more tapered look, you can reshape the legs. First, try on your shorts and mark where you want the new seam to be. Use pins to mark the new seam line, creating a slight curve from the top of the thigh to the hemline. Be sure to keep the existing inseam as a guideline.
Use your seam ripper to carefully open the side seams to the marked lines. Then, cut along the marked lines, removing the excess fabric. Lay the new seam with right sides together, and stitch along the new seam line. Press open the seam, then fold and stitch a new hem. Your shorts should now have a more fitted, tapered leg that flatters your figure.
With these simple alterations, you can learn how to make shorts fit tighter and create a customized look that flatters your figure. So go ahead and transform your wardrobe – one pair of shorts at a time. Why stop at shorts? Explore more customs tailoring ideas for other clothes in your wardrobe. Happy sewing!