how to make resin keycap

Crafting Perfect Resin Keycaps: A Step-by-Step Guide

By Richard Wilson
AD

Embarking on the creative journey of crafting your own resin keycaps can be an incredibly rewarding experience. Not only does it allow you to customize your keyboard to your unique style, but it also offers a steep learning curve into the world of resin art. This comprehensive guide will walk you through the process of creating your resin keycaps, from gathering materials to the final polishing stages. Let's dive right in.

Before we begin, it's crucial to understand that working with resin requires patience, precision, and proper safety measures. Ensure you're working in a well-ventilated area and wear appropriate protective gear, including gloves and eye protection. Now, let's look at the materials and tools you'll need to get started.

Gathering Your Materials

The first step in creating your resin keycaps is gathering all the necessary materials. You'll need epoxy resin, a hardener, latex or nitrile gloves, a mixing cup, a stir stick, safety glasses, a respirator, a scale accurate to 0.1 grams, and your desired mold or 3D printed keycap shapes. Optional, but highly recommended, are a colorant or pigment for added flair and gloves with a built-in resin barrier for easier cleanup.

AD
First time making resin keycaps!
First time making resin keycaps!
a person holding a plastic container in their hand
a person holding a plastic container in their hand

It's also essential to have your workspace prepared. Cover your surface with plastic or wax paper, and have paper towels or cups of water nearby for cleaning up spills. Remember, resin is sticky, so keep things simple and disposable.

Molding Your Keycaps

With your materials ready, it's time to start mixing and molding your resin keycaps.

Mixing the Resin

Resin and hardener are mixed in a specific ratio, usually 1:1 by weight. Using a scale, carefully measure out the required amount for your keycaps. Then, slowly pour the resin into the mixing cup, followed by the hardener. Using your stir stick, mix the two together for about 2 minutes, scraping the sides and bottom of the cup as you go. Once combined, let the mixture sit for 2 minutes to release any air bubbles.

At this point, if you're using a colorant or pigment, mix it into the resin and hardener mixture. Add it slowly, drop by drop, until you reach the desired color. Be sure to mix it thoroughly to ensure even distribution.

AD

Pouring the Resin

Now that your resin is mixed and colored, it's time to pour it into your molds. Slowly pour the resin into each mold, being careful not to create air bubbles. Fill each mold until it's about 3/4 full. Then, using a toothpick or paintbrush, slowly swirl the resin around the mold to coat the entire surface evenly. Once coated, add more resin to fill the mold completely.

Allow the resin to sit undisturbed for about 24 hours to cure. During this time, avoid moving the molds or tilting them, as this can cause air bubbles to form. After 24 hours, check if your resin is fully cured. If it's still slightly soft, give it another 8-12 hours. Once fully cured, carefully pop your keycaps out of the molds.

Post-Curing and Sanding

After removing your keycaps from the molds, they'll likely have a slightly rough or frosty appearance. This is due to the resin's post-curing process, where it continues to harden over time. To improve the surface finish, you can use a process called wet sanding.

AD

Post-Curing

Place your keycaps in a well-ventilated area and allow them to cure for an additional 3-7 days. This will help ensure they reach their full hardness and luster. During this time, avoid exposing your keycaps to extreme temperatures or direct sunlight.

Sanding

Once your keycaps have fully post-cured, it's time to sand them to achieve a smooth, glossy finish. Start with a fine-grit sandpaper, around 1500-2000 grit, and lightly sand the surface in a smooth, circular motion. Continue sanding until the surface feels completely smooth and even.

You can use a power sander for this process, but be extremely careful not to apply too much pressure or sand unevenly. Alternatively, you can use a sanding sponge or even sand by hand for better control. After sanding, wipe your keycaps clean with a damp cloth to remove any residual dust.

AD

Your resin keycaps are now complete! All that's left is to mount them onto your keyboard. Remember that cleaning up your workspace and properly disposing of any resin waste is crucial for safety and the environment.

Creating your own resin keycaps is a fantastic way to add a personal touch to your keyboard. Whether you're a seasoned makerspace enthusiast or a beginner looking to dabble in resin art, this guide provides a solid foundation for your keycap-making journey. So, what are you waiting for? Get creative, have fun, and happy keycap crafting!

AD