how to make ocarina

Mastering the Ocarina: Step-by-Step Guide on How to Make and Play

By James Taylor
AD

The ocarina, a simple and ancient wind instrument, continues to captivate beginners and professionals alike. Its distinct look and melodic sound make it a popular choice for many. Learning how to make an ocarina can be a rewarding hobby and a great way to understand the science behind sound. So, let's dive into the process of crafting your own ocarina and create music with a piece of history.

Before we begin, gather your materials. You'll need clay, a clay sculpting tool, a Turner's rim, a pottery wheel if possible, a marking gauge, a steel ribbon, and a popsicle stick or needle tool. Once you have your tools, let's start creating your ocarina.

Design and Preparation

Understanding the anatomy of an ocarina is crucial before you begin. An ocarina has five holes covered with the thumb and four fingers, a windchest, and a mouthpiece. Sketch your design beforehand to ensure you're creating the correct shape.

AD
Ocarina
Ocarina
How to make a clay ocarina
How to make a clay ocarina
the hands are making clay sculptures with wooden sticks
the hands are making clay sculptures with wooden sticks

Clays suitable for ocarinas include earthenware, stoneware, and raku clays. Avoid high-fire clays like porcelain. With your clay and design ready, let's begin.

Creating the Ocarina Body

Start by weighing your clay to ensure consistency between ocarinas. A standard 12-hole ocarina typically requires around 1.5 to 2 pounds of clay. Use your hands or a pottery wheel to form your clay into a cone shape, applying pressure evenly to create a uniform thickness.

"Ocarinas" by Elizabeth Paley
"Ocarinas" by Elizabeth Paley
Let's make an ocarina! #shorts #ocarina #tips
Let's make an ocarina! #shorts #ocarina #tips

Using your clay sculpting tool, carefully carve out the holes on the body of your ocarina, ensuring they're spaced appropriately to correspond with the five holes and thumb position. Be patient and take your time to ensure precise holes.

Shaping the Windchest

The windchest is the chamber where the air resonates, creating the sound. To form it, create a thick wall around the open bottom of your clay cone, leaving a passage for air to flow from your mouthpiece to the holes. The width of your windchest will affect the pitch of your ocarina, so adjust it according to your desired notes.

AD

Once shaped, use a marking gauge to measure and mark the desired depth of your windchest. Carefully thin the walls evenly using your needle tool, ensuring you maintain the marked depth.

Crafting the Mouthpiece

The mouthpiece is critical for producing sound. Shape it like a small, wide tube open at one end and sealed at the other. Its diameter should be large enough to fit your lips comfortably, and its length should be consistent with the body of your ocarina.

Position the mouthpiece at the narrow end of your cone, ensuring it's centered and creates an airtight seal when your lips press against it. Use your steel ribbon to smooth out any imperfections and create a seamless connection between the mouthpiece and the ocarina body.

AD

Refining the Design

Use your Turner's rim to refine the edge of your ocarina where your lips will touch. This ensures a smooth and comfortable playing experience. Also, scrape the inner walls of the mouthpiece with a needle tool to create slightly roughed-up surfaces - this will help your lips stick to the mouthpiece, creating a better seal.

Finally, use the popsicle stick to carefully create the finger diverters, small walls that direct the flow of air from the mouthpiece to the finger holes. These should be thin and well-defined to ensure smooth airflow.

Finishing Touches

Allow your ocarina to dry slowly and evenly to minimize warping or cracking. Once completely dry, carefully trim any excess clay from the bottom of the windchest. Sand the surface of your ocarina to smooth out any rough edges or sharp corners.

AD

Your ocarina is now ready for the firing process. Follow the guidelines for your chosen clay type to achieve the best results. Once fired, apply a food-safe glaze if desired, and fire it again according to the manufacturer's instructions.

Your handcrafted ocarina is now ready to play! Practice your embouchure, or the way you purse your lips, to produce the right sound. Experiment with your ocarina to find the range of notes it can play, from low to high. Happy playing, and enjoy the satisfaction of creating your own musical instrument!

AD