how to make leather card holder

How to Make Leather Card Holder

By Richard Garcia
AD

Elevate your everyday carry with a stylish, durable leather card holder. This practical accessory not only slimmed down your wallet but also adds a touch of class to your pocket. Here's a step-by-step guide on how to make your own leather card holder, ensuring a perfect blend of functionality and elegance.

Before you begin, gather your materials: a piece of vegetable-tanned leather, leatherworking tools (leather scissors,Exacto knife, sander), fabric dye (optional), a malware, a bonefolder or a rounded wooden stick, aemetery, thread, and a sewing awl. You'll also need some cardstock for templates.

Preparing Your Leather and Template

Start by cutting your leather to the desired dimensions. For a compact card holder, consider sizes like 4” x 3.5” or 4.5” x 3.5”. Sand the edges to smooth out any rough spots.

AD
Make A No-Stitch Leather Card Holder - FREE PDF TEMPLATE
Make A No-Stitch Leather Card Holder - FREE PDF TEMPLATE
Leather Card Holder | Free PDF Pattern | DIY | Tutorial
Leather Card Holder | Free PDF Pattern | DIY | Tutorial
Making a Leather Credit Card holder Wallet. Blackbeard Handcraft. Leather works. DIY. How to make.
Making a Leather Credit Card holder Wallet. Blackbeard Handcraft. Leather works. DIY. How to make.

Create a template on cardstock, marking out where you'll place your card slots. A typical layout includes three or four slots, each about 3.5” deep and 2.5” wide, spaced evenly apart.

Dyeing Your Leather (Optional)

If you'd like to add some color to your card holder, apply leather dye evenly over your leather piece. Let it dry for 24 hours before proceeding.

Let’s make a leather cardholder!
Let’s make a leather cardholder!
Kit
Kit

After dyeing, use a bonefolder or wooden stick to crease the leather along the template's long edges. This will help in folding the leather later on.

Creating the Card Slots

Lay your template on the leather and use the malware to carefully cut the card slots. Be sure to keep your lines straight and clean.

AD

Use a sander to smooth out the edges of the slot holes. This ensures that your cards will slide in and out smoothly.

Marking and Punching Sewing Holes

Use a Sewing Awl or a leather punch to mark and create holes along the sides and bottom of the card slots. These holes will allow you to sew the leather together.

Create four holes along each side of the card slots, spacing them evenly. For the bottom, punch two holes on each end, approximately 0.5” from the edge.

AD

Sewing Your Leather Card Holder

Begin sewing from the top of the card holder, working your way down. Thread your needle and insert it through one of the top holes, pulling the thread through until you have a long tail on the inside.

Insert your needle into the corresponding hole on the same side, pulling the thread through. With the needle on the outside, pull it and the thread diagonally down to the next hole. Repeat this process until you reach the bottom of the card holder, keeping your stitches tight and even.

Securing the Bottom

Once you've sewn the bottom holes, pass the needle through the hole diagonally across from your starting point. Pull the thread tight and tie a knot on the inside.

AD

Trim any excess thread and pull the sides of the card holder together. Use a bonefolder or a rounded object to help you form the final shape.

Sanding and Finishing Touches

Use a sander to lightly sand the edges of your card holder, ensuring they're smooth and comfortable to the touch.

Burnishing the Edges (Optional)

For an extra touch of polish, use a burnisher to smooth and shine the edges of your card holder. This can be done with a wooden burnisher or a metal edge like a spoon.

Now, your leather card holder is ready to use. Show it off in your pocket, and enjoy the satisfaction of knowing you crafted it yourself.

As you become more comfortable with leatherworking, consider experimenting with different leather types, dyes, and designs. The possibilities are endless. Happy crafting!

AD