how to make fishing rod holder

How to Make a Fishing Rod Holder

By Matthew Thompson
AD

Imagine spending a lazy afternoon by the lake, rod in hand, waiting for that telltale tug on your line. To make this picture perfect, you need a reliable fishing rod holder that keeps your gear safe and ready for action. Here's a step-by-step guide on how to make your own fishing rod holder, ensuring you always have a place to rest your rod and keep both hands free for that catch of the day.

Before we dive in, let's ensure you have the right tools and materials. You'll need a jigsaw or handsaw, a drill, sandpaper, a measuring tape, and about an hour of your time. For materials, you'll require a piece of wood (like cedar or pine, around 1" thick and 16" wide), some screws, wood glue, and outdoor varnish or paint to protect your creation from the elements.

Making the Base of Your Fishing Rod Holder

The base is your rod holder's foundation, giving it stability and keeping it upright. Start by measuring and marking four lines across the width of your wooden plank, 1.5" apart. This will give you five equal sections.

AD
32 DIY Fishing Rod Holder Plans and Ideas
32 DIY Fishing Rod Holder Plans and Ideas
How To Make a DIY Fishing Rod Holder
How To Make a DIY Fishing Rod Holder
DIY Fishing Rod Holder - Well She Tried
DIY Fishing Rod Holder - Well She Tried

Using your drill, carefully create a 1.5" hole in the center of each section. These holes will accommodate the legs that prop up your rod holder.

Creating the Legs

For the legs, you'll need four pieces of wood, measuring 1" x 1.5" x 8". These can be cut from the same piece of wood you used for the base. Ensure they're smooth and free of splinters to make handling easy.

Basic Fishing Rod Holder
Basic Fishing Rod Holder
DIY Fishing Rod Holder for Garage Ceiling (Do It Yourself!)
DIY Fishing Rod Holder for Garage Ceiling (Do It Yourself!)

Using wood glue, attach two of these leg pieces to the underside of the base, aligning them with the holes you previously drilled. Allow the glue to dry completely before proceeding. Once dry, attach the remaining two legs, ensuring your rod holder stands firmly and level on the ground.

Adding Support with Crossbraces

To provide extra stability, add two cross braces made from the remaining two leg pieces (cut down to 4" in length). Attach one brace between the first and third legs, and the other between the second and fourth legs, creating an 'X' shape. This will help distribute weight evenly and prevent wobbling.

AD

Let the glue dry again before moving on. Once secure, you've got the base of your rod holder sorted, ready to stand strong on any terrain.

Crafting the Fishing Rod Holder's Main Component

The main component is where your rod will rest. You'll need another piece of wood (around 16" long, 2" wide, and 1" thick). Drill two evenly spaced holes, 1.5" in diameter, into one end of this piece. These holes should be 2" apart and aligned with the holes in the base when the main component is resting on it.

Next, use your jigsaw or handsaw to cut a groove down the center of this piece, starting from the drilled end and extending about 12" along its length. This groove should be about 1.5" wide and 0.5" deep, providing a place for your rod to rest securely.

AD

Creating the Rod Rest

The rod rest is a small piece of wood (around 1" x 1.5" x 4") that keeps your rod in place, preventing it from sliding out. Using your jigsaw, shape one end of this piece into a gentle curve that matches the shape of your rod. Drill a small hole (around 0.5" in diameter) at the other end,big enough for a screw.

Screw the rod rest onto the underside of the main component, 12" from the drilled end, ensuring it lies flush with the groove and provides a gentle slope for your rod to rest against. Your main component is now ready for assembly.

Assembling the Fishing Rod Holder

Gently insert the main component into the base, aligning the holes and placing the groove facing upwards. Secure the main component in place by screwing it through the holes in the base, using one screw per hole. You'll now see your rod holder taking shape.

AD

To protect your creation, apply a coat of outdoor varnish or paint, and allow it to dry completely. Your_DIY fishing rod holder is now ready to stand vigil, keeping your rod safe and within reach at all times.

So there you have it - your very own, handmade fishing rod holder, supporting your angling escapades in style. Happy fishing!

AD