how to make dirt bike stand

Mastering the Dirt Bike Kickstand: How to Make It Stand

By Daniel Allen
AD

Keeping your dirt bike in excellent condition is crucial for safety and performance. One essential maintenance task is knowing how to make your dirt bike stand on its own. This not only makes storage and cleaning easier but also ensures your bike remains level and doesn't topple over. In this guide, we'll walk you through a simple yet effective method to make your dirt bike stand upright.

Before we dive into the details, ensure you have the necessary tools on hand. You'll need a 12mm or 14mm socket wrench, a breaker bar, and a torque wrench (optional but recommended). Also, block your kickstand for safety, as it won't be in use. Now, let's get started.

Preparation and Tools

Before starting, find a flat and stable surface to work on. This could be a concrete floor in your garage or a paved area. Remember to disconnect the negative cable from your battery to prevent any electrical shorts. Once everything is set up, let's proceed.

AD
two small wooden tables sitting in front of a black truck parked next to a garage door
two small wooden tables sitting in front of a black truck parked next to a garage door
few know how to build a standard dirt bike paddock.| Homemade jack stands
few know how to build a standard dirt bike paddock.| Homemade jack stands
homemade dirt bike lift stand #diy #motorcycle #metalworking
homemade dirt bike lift stand #diy #motorcycle #metalworking

If your dirt bike doesn't have a center stand, you might need to purchase one. Center stands are essential for most off-road motorcycles to allow proper cleaning and maintenance while keeping the bike level. Make sure to get one that is compatible with your bike's make and model.

Installing the Center Stand

Before installation, ensure your center stand is clean and free of any debris. If necessary, lubricate the pivot points with a suitable grease to reduce friction and facilitate movement.

a wooden table sitting on top of a hard wood floor next to a building wall
a wooden table sitting on top of a hard wood floor next to a building wall
Home Made Dirtbike stand DIY
Home Made Dirtbike stand DIY

Position the center stand correctly, aligning the holes with the corresponding marks on the swingarm. Using your 12mm or 14mm socket wrench, tighten the bolts by hand initially. Then, use the breaker bar to apply more force, but be careful not to overtighten. Once both bolts are secure, use a torque wrench to achieve the manufacturer's recommended torque specs (if available).

Attaching the Lift Assist Mechanism (Optional)

Some center stands come equipped with a lift assist mechanism to make it easier to raise and lower the stand. If yours has one, consult your owner's manual to find out how to attach it correctly. For most lift assist mechanisms, you'll need to install a cable and a linkage rod between the stand and the frame.

AD

Secure the cable ends using the provided cable ties or crimps, and ensure the linkage rod moves smoothly within its guide. Test the lift assist mechanism by trying to lift the bike. It should feel relatively effortless once the stand is properly engaged.

Using the Center Stand

Now that your center stand is installed, it's time to learn how to use it correctly. First, find a suitable resting place for your bike, ensuring the stand will have enough clearance and won't sink into soft ground.

Shift the bike into neutral and apply the rear brake. Lean the bike toward the side of the center stand while supporting the weight with your hands or a sturdy helper (like a paddock stand). Gently lower the bike onto the stand, allowing it to rest securely. To lift the bike back up, simply reverse the process.

AD

Storage and Care

When not in use, make sure to engage the kickstand once again to prevent the bike from leaning to one side. Also, consider using a penetrating lubricant periodically on the center stand pivot points to keep them moving freely and prevent seizing.

Regularly inspect the center stand for any signs of wear or damage. Tighten the bolts if necessary, and address any issues promptly to ensure your bike remains stable and safe to work on.

eti sun, every ride offers a new adventure, and maintaining your dirt bike properly ensures you'll be ready for the next one. Learning how to make your dirt bike stand on its own is a fundamental aspect of keeping your bike in top shape. So, get out there, enjoy the dirt, and with a little practice, you'll be making your dirt bike stand like a pro in no time. Happy trails!

AD
AD