How to Make Bell Bottom Jeans: A Step-by-Step Guide
Bell bottom jeans, a style icon of the '70s, are making a comeback. If you're eager to sport this retro fashion, why not make your own? Here's a comprehensive guide on how to make bell bottom jeans at home.
Before you begin, gather your materials: sturdy denim, paper and pen for pattern drafting, a measuring tape, sharp scissors, fabric marker, pins, sewing machine with a heavy-duty needle, and a seam ripper. Let's dive in!
Creating a Pattern
First, you'll need to create a pattern for your bell bottoms. Start by measuring your waist, inseam, and the width you want for the bells at the ankle.
Using these measurements, draft your pattern on paper, ensuring to include theCB (center back), CF (center front), inseam, and outseam points. Mark the ankle width where you want the bells to start, and angle the seam line accordingly.
Pattern Adjustments
Bell bottoms typically have a high waist and a wide, rounded bottom. To achieve this look, adjust your pattern accordingly. For a high waist, angle the waistline downwards towards the CB and CF points. For the bells, extend the ankle width and round off the corners.
Don't forget to add seam allowances—typically, 1.5cm to 2cm—to your pattern. Cut out your pattern pieces, being mindful of the grain line, and prepare your fabric.
Preparing and Cutting the Fabric
Pre-wash and dry your denim to prevent shrinkage later. Lay out your pattern pieces on the fabric, ensuring the grain line follows the width of the fabric. Using a fabric marker, trace around your pattern pieces and cut them out.
Remember, you'll need two of each piece (front and back) for your jeans, plus extra fabric for the waistband and bell facings. Cut these additional pieces, following the same grain line direction as your main pieces.
Sewing the Jeans
Now that your fabric is cut, it's time to start sewing. Begin with the seams. Place your front and back pieces together, right sides facing, and sew along the inseam, outseam, and crotch seams using a heavy-duty needle and denim thread.
Press your seams open to prevent bulk. Next, sew the inner leg seam, the seam that connects the crotch and inseam. Again, press the seam open.
Attaching the Waistband
Create your waistband by sewing together the two rectangular pieces, right sides facing, and turning it right-side out. Topstitch it to the top of your jeans, ensuring it fits snugly without causing any bulk. This will be your jeans' waist.
For the bells, sew together the two facing pieces, right sides facing, to create one continuous facing. Topstitch one edge of the facing to the bottom of your jeans, leaving the other edge raw. This will be the hem for your bells.
Creating the Bells
Now for the pièce de résistance—the bells! Start by hemming the bottom of your jeans, turning up the raw edge and pressing, then sewing in place. This will be the narrow hem at the ankle.
Next, grab your facing and, starting from the narrow hem, begin to sew the facing to the bottom of your jeans, slowly widening the seam as you go. Continue to sew until you reach your desired bell width. Press, then topstitch the facing in place, creating a clean finish and permanent bell shape.
Try on your new bell bottoms, and enjoy the satisfaction of having made them yourself. Ready to take your sewing skills to the next level? Why not attempt making a jumpsuit or a denim jacket next?