how to make an easel stand

"DIY Easel Stand: Easy Steps to Make Your Own

By Mark Allen
AD

Easels are invaluable tools for artists, offering a sturdy, adjustable surface to create masterpieces. But what if you're just starting out or need a more portable option? Here's how you can make your own DIY easel stand at home, perfect for both beginners and professionals on the go.

A homemade easel allows you to customize your workspace, save money, and even personalize your art station. Plus, it's an easy weekend project that doesn't require advanced woodworking skills. So, let's dive into the step-by-step guide to create your ideal easel stand.

Materials Needed

The first step in making your easel stand is gathering the necessary materials. You'll need:

AD
DIY Project - Easel - Life Hack and DIY Lifestyle
DIY Project - Easel - Life Hack and DIY Lifestyle
someone is cutting out paper with scissors on the table next to it, which has been cut into smaller pieces
someone is cutting out paper with scissors on the table next to it, which has been cut into smaller pieces
DIY easel
DIY easel
  • 2x4 lumber (about 8 feet total)
  • 1x2 lumber (about 10 feet total)
  • Wood screws (1-1/4" and 2" lengths)
  • Wood glue
  • Sandpaper (80 and 120 grit)
  • Stain or paint (optional)
  • Clamps
  • Drill with screwdriver bits
  • Circular saw or miter saw

Measure and Cut the Lumber

Once you have your materials, it's time to measure and cut your lumber to size. You'll need the following cuts:

  1. Two pieces of 2x4 at 18" for the base
  2. Two pieces of 2x4 at 34" for the legs
  3. Four pieces of 1x2 at 17" for the frame supports
  4. Four pieces of 1x2 at 21.5" for the back legs
  5. One piece of 2x4 at 36" for the main support bar
  6. One piece of 2x4 at 38" for the height adjustment bar

Assemble the Base

Begin by attaching the two 18" 2x4 pieces together using wood glue and 1-1/4" screws to form the base of your easel.

DIY Garden Art Easel (Elevate Your Backyard Decor)
DIY Garden Art Easel (Elevate Your Backyard Decor)
how to make a desktop easel out of an orange piece of paper and scissors
how to make a desktop easel out of an orange piece of paper and scissors

Clamp the pieces together while the glue dries, ensuring a tight fit. Once dry, sand any rough edges or surfaces with 80-grit sandpaper, followed by 120-grit for a smooth finish. If desired, stain or paint the base and allow it to dry.

Construct the Frame

Now that the base is complete, it's time to build the frame around it.

AD

Tip: Before attaching any pieces, lay out your lumber according to the cuts you made earlier to ensure everything fits together correctly.

Attach the Frame Supports

Attach the 17" 1x2 pieces to the inside edges of the base, using 1-1/4" screws. These will serve as supports for the canvas.

Ensure the supports are positioned evenly, measuring from the center of the base outwards to maintain stability. Don't worry too much about perfection; this is a DIY project, after all!

AD

Add the Legs and Back Supports

Next, attach the 34" 2x4 legs to the base using 2" screws. These will provide the primary support for your easel. Space them evenly apart, again measuring from the center outwards for balance.

Now, attach the 21.5" 1x2 back legs to the center of each 2x4 leg, using 1-1/4" screws. These will keep your easel steady and prevent your canvas from falling back.

Build the Main Support Bar

Attach the 36" 2x4 main support bar to the top of the frame supports and back legs using 2" screws. This will form the backbone of your easel.

AD

Measure and mark the center point of this bar. You'll use this point later for height adjustment.

Create the Height Adjustment Bar

Finally, attach the 38" 2x4 height adjustment bar to the main support bar using 3" screws. Ensure the bar is loose enough to slide up and down but tight enough to remain in place when set.

Once again, sand any rough edges, stain or paint as desired, and allow it to dry.

Putting it All Together

Now that all the components are assembled, it's time to connect them to form your easel stand.

Tip: Work on a flat, stable surface to ensure your easel is even and sturdy.

Assemble the Easel

First, attach the base to the legs using 2" screws. Ensure the frame supports are facing upwards.

Next, attach the main support bar to the top of the legs and frame supports using 2" screws. Make sure the center point you marked earlier is on top of the base.

Adjust the Height

Now, slide the height adjustment bar onto the main support bar, lining up the center point with the top of the base.

Lift the adjustment bar to your desired height, and hold it in place by driving a screw through the main support bar and into the adjustment bar. You can insert this screw at an angle for easy removal when you want to adjust the height again.

Congratulations! You've just created your very own DIY easel stand. Now, get painting, drawing, or creating whichever art form brings you joy. And remember, practice makes perfect – not only for your craft but also for future DIY projects.

AD