Mastering Viking Helmets: DIY Guide
Embark on an exciting historical journey with this comprehensive guide on how to make a Viking helmet. While these iconic headpieces might seem intimidating to craft, we've broken down the process into simple, understandable steps, perfect for both beginners and seasoned DIY enthusiasts. Let's dive in!
Before you start, remember that no two Viking helmets were identical. They varied greatly depending on the region, wealth, and status of the warrior. For this guide, we'll focus on creating a simplified, classic Viking helmet inspired by the ancient Norsemen. So, gather your materials and let's begin!
Gathering Materials and Tools
The first step in creating your Viking helmet is to gather all the necessary materials and tools. Here's a list to get you started:
Materials:
- Six sheets of 24-gauge steel or aluminum
- Wire hanger
- retourner or annealer (optional, but helpful for shaping)
- Galeria or fiberglass resin (for concrete-like helmets)
Tools:
- Angle grinder with metal cutting blade
- Tin snips
- Metal shears
- Hammer
- Dolly or anvil
- Pliers (needle nose and round nose)
- Safety glasses
- Work gloves
- Soldering iron and flux (if joining metal pieces)
Now that you have your materials and tools ready, let's move on to creating the basic shape of your helmet.
Creating the Helmet Base
The helmet's base is the main structure that will hold everything together. To create this, we'll use four of the metal sheets to form two dome shapes:
1. Measure and mark the center of one sheet. Using the angle grinder or tin snips, cut out a circle with an approximate diameter of 8 inches.
2. Smooth any ragged edges with the grinder or file.
3. Repeat to create a second identical dome.
4. Stack the two domes and mark their centers. Punch a small hole through both to create a pivot point.
5. Using the hammer and dolly or anvil, carefully flatten one dome while leaving the other rounded. This will be the helmet's base.
Next, let's connect these two base pieces to form a single, solid structure.
1. Stack the flattened and rounded domes together, aligning the centers.
2. Drill or punch holes around the edge of the flattened dome every 1-2 inches.
3. Using the matching sheet metal screws, secure the domes together, ensuring they stay aligned.
4. Reinforce the connection by taping the seam with high-temperature tape or soldering it if prefered.
Crafting the Cheek Plates
The cheek plates protect the user's face and attach to the helmet base. Here's how to create them:
1. Fold the fifth sheet of metal in half lengthwise. Using the folded edge as a guide, draw a curved shape on the metal that runs from one top corner to the opposite bottom corner.
2. Cut out this shape on both sides of the fold using tin snips or an angle grinder.
3. Open the folded metal and you should have two identical cheek plates. If necessary, trim and adjust the size to fit the helmet base.
To attach the cheek plates:
1. Place the helmet base on top of a cheek plate, lining up the bottom edge of the base with the top of the cheek plate.
2. Mark the bottom edge of the base onto the cheek plate and cut along this line using tin snips or an angle grinder.
3. Drill and tap small holes at the top edge of the cheek plate and attach it to the helmet base using small sheet metal screws.
4. Repeat this process to attach the other cheek plate.
Shaping and Finishing the Helmet
Now that you have the basic structure of your Viking helmet, it's time to give it some shape and finishing touches.
Shaping:
1. Use the hammer and dolly or anvil to gently shape the helmet base, cheek plates, and any protruding edges for a more seamless, balanced look.
2. Use pliers to bend and shape the wire hanger into the desired angle for the rebotes (the horns or wings on the sides of the helmet). Attach these to the cheek plates using small screws.
3. If desired, use the représenté or annealer to heat and flatten out any imperfections or kinks in the metal.
Finishing:
1. Smooth any rough edges and remove burrs from the metal using a file or dremel.
2. Sand the entire helmet lightly to prepare it for painting or patinating.
3. For concrete-like helmets, mix the Galvavia or fiberglass resin according to the manufacturer's instructions and apply it to the helmet using a brush or sponge. Let it cure completely before proceeding.
4. Prime the helmet with a suitable metal primer and allow it to dry.
5. Paint the helmet with your chosen colors and finish with a clear sealant to protect the paint.
Congratulations! You've now crafted your very own Viking helmet. Display it proudly, or wear it with confidence during reenactments, Renaissance fairs, or cosplay events. Happy crafting, and may the gods be with you!