how to make a surgical cap

How to Make a Surgical Cap at Home: A Step-by-Step Guide

By Nicole Taylor
AD

Surgical caps, also known as bouffant caps or scrub caps, are essential in maintaining aseptic techniques in operating theaters. They cover the wearer's hair, providing a barrier to prevent contamination. Making your own surgical cap can save you money and allow you to customize the design. Here's a simple guide on how to make a surgical cap at home.

Before we begin, it's crucial to note that while these caps can be used for surgical procedures, they may not meet the same standards as commercially produced caps. Always prioritize safety and follow your institution's protocols.

Materials Needed

Creating a surgical cap requires minimal materials. Here's what you'll need:

AD
Scrub cap/surgical cap easy pattern - Arcady Genkin
Scrub cap/surgical cap easy pattern - Arcady Genkin
Best Scrub Cap Patterns to DIY for health care workers - by Marissa Zingg
Best Scrub Cap Patterns to DIY for health care workers - by Marissa Zingg
Simple Scrub Cap Step by Step Tutorial with Free Pattern!!
Simple Scrub Cap Step by Step Tutorial with Free Pattern!!
  • Fabric: 100% polyester or a sterile, disposable fabric works best. Avoid cotton as it can absorb liquids and promote bacterial growth.
  • Scissors
  • Tape measure
  • Pencil
  • Straight pins
  • Sewing machine or needle and thread for hand sewing

Measuring and Pattern Creation

The first step is to create a pattern for your cap. Measure your head circumference to determine the size of your cap. On average, adult head circumferences range from 56 to 59 cm (22 to 23 inches).

Using your measurement, draw a simple pattern on your fabric. The basic shape of a surgical cap is a semicircle with two elongated sides for the ties. Our pattern will include a 1 cm seam allowance for sewing.

the instructions for how to sew a scrub cap with 2 free printable scrub caps
the instructions for how to sew a scrub cap with 2 free printable scrub caps
how to sew a surgical cap
how to sew a surgical cap

Cutting the Fabric

Cut out two identical pieces from your fabric using the pattern you've created. For a more durable cap, you can add a third layer of fabric to reinforce the peak of the cap and the ties.

Carefully cut your fabric pieces, ensuring the grain runs straight. This will help your cap maintain its shape and prevent it from stretching out of shape during wear.

AD

Assembling the Surgical Cap

Once you have your fabric pieces cut, you're ready to start sewing.

Sewing the Sides

Start by placing the two (or three, if reinforcing) fabric pieces together, right sides facing in. Pin them in place, ensuring the patterns match up.

Sew along the two straight sides of your cap using a straight stitch. Leave the curved edge and the ties unsewn for now.

AD

Sewing the Peak

Secure the curves of the patterns together to form the peak of your cap. Tuck one curve inside the other, with the right sides still facing inward. Pin them in place.

Carefully sew along the curved edge, pulling the fabric gently as you sew to create a smooth, rounded peak. Backstitch to secure the seam.

Your surgical cap is almost complete! The next step is to finish the raw edges and create the ties.

AD

Finishing the Raw Edges

Fold the raw edges of the ties to the inside and press them flat with an iron. Then, topstitch along the edge to secure them.

For a more professional finish, you can fold the raw edges under again and stitch them in place, creating a narrow hem.

Creating the Ties

Measure and cut two pieces of fabric, each about 30 cm (12 inches) long and 2.5 cm (1 inch) wide, for the ties. These will help secure the cap to your head.

Fold each piece of fabric in half lengthwise, with the right sides facing inward. Sew along the long edge and one of the short edges, leaving one short edge open. Turn the fabric right-side out and press the seam flat. This will create a tube for your tie.

Testing Your Cap

Before you start using your cap, test it to ensure it fits correctly and provides adequate coverage. Your peak should cover your forehead, and the ties should allow you to adjust the cap comfortably.

If necessary, make any adjustments to your pattern and try again.

Making your own surgical cap is a straightforward process that can save you money and allow you to customize your style. Always remember to prioritize safety and follow your institution's protocols. Happy sewing!

AD