how to make a stringer shirt

How to Make a Stringer Shirt: A Simple Step-by-Step Guide

By Matthew Rodriguez
AD

Step into summer chic with your very own stringer shirt! A stringer, also known as a racerback, is a versatile addition to any wardrobe. It's perfect for layering, working out, or just lounging around. Today, we're going to guide you through creating your own, so grab your sewing machine and let's dive in!

Whether you're a seasoned seamstress or a beginner looking to expand your skills, this project is a fun and rewarding one. We'll be using basic sewing techniques and you'll be surprised at how quickly you can make a stylish, comfortable stringer shirt.

Gather Your Materials

Before we begin, ensure you have all the necessary materials. This will not only make the process smoother but also prevent any last-minute trips to the store.

AD
How to Make the Perfect Stringer Tank | Evan Centopani
How to Make the Perfect Stringer Tank | Evan Centopani
How To Make The Perfect Cut-Off Shirt For The Gym!
How To Make The Perfect Cut-Off Shirt For The Gym!
DIY Muscle Tank From T-Shirt
DIY Muscle Tank From T-Shirt

Here's a simple list to get you started:

  • Fabric - Choose a breathable, lightweight material like cotton or polyester for a classic stringer. You'll need approximately 0.5 yards.
  • Sewing Machine - With a good quality sewing machine, you'll breeze through this project.
  • Scissors or Rotary Cutter and Mat - Essential for cutting out your pattern pieces.
  • Thread - In a color that complements your fabric. All-purpose polyester or cotton thread works well for this project.
  • Sewing Machine Foot - A replica foot can be helpful for keeping the fabric steady while sewing.
  • Straight Pins - To temporarily hold your pattern pieces in place.
  • Ruler or Measure Tape - For accurate measuring and cutting.

a t - shirt hanging on a wooden door with the words, quick tip for sewing jersey
a t - shirt hanging on a wooden door with the words, quick tip for sewing jersey
someone is stitching something on the side of a purple shirt with text that reads, how to shorten your shoulder straps?
someone is stitching something on the side of a purple shirt with text that reads, how to shorten your shoulder straps?

Create Your Pattern

Before you start sewing, you'll need to create a pattern for your stringer. Don't worry, it's simpler than it sounds!

Here's a basic pattern you can create on paper or cardstock. You will need to print out and tape together two patterns, one for the front and one for the back if using paper. You can adjust the sizes as needed to suit your body type:

AD

Front Pattern Piece

1. Draw a rectangle that is 18" wide and your preferred length for the front piece. For this example, let's use 15".

2. From the top of the rectangle, measure 1.5" down and draw a line 7" wide. This will be the neckline.

Back Pattern Piece

1. Draw a rectangle that is 20" wide (to accommodate the straps) and your preferred length. Again, we'll use 15".

AD

2. From the top of the rectangle, measure 1.5" down and draw a line 5" wide. This will be the neckline.

Cut Out Your Pattern

Once your pattern is complete, cut out your pieces. Remember to add a 0.5" seam allowance to all sides of your pattern.

Place your fabric on a flat surface, with the right sides facing down. Lay your pattern pieces, with the cut edges aligned with the fabric's edge and the grainline parallel to the fabric's grain. Pin in place and cut out your fabric pieces.

AD

Sew Your Stringer

The sewing process is straightforward. You'll be sewing straight seams, hems, and attaching the straps. Let's run through it step by step:

Sew the Front and Back Together

1. Place the front piece right side facing the back piece, matching the top edges (neckline).

2. Sew along this edge, using a 0.5" seam allowance. Leave the side edges and bottom open.

Hem the Bottom Edge

1. Fold up the bottom edge of both the front and back pieces approximately 0.5". Press with an iron.

2. Hem by topstitching along the folded edge.

Create the Straps

1. Cut two strips of fabric, each 3" wide and 18" long. Fold these strips in half, right sides facing, and sew along the long edge.

2. Turn the strips right side out. Press.

3. Hem the top and bottom edges using the same method as the bottom hem on your shirt.

Attach the Straps

1. Place the straps against the wrong side of the back piece, on the 7" line you've drawn, and 1.5" in from the side edge. The raw edges of the straps should be aligned with the raw edge of the back piece.

2. Sew the straps in place, using your replica foot to keep the fabric steady.

Try on Your New Stringer Shirt!

Carefully cut out the corners at the bottom of your shirt to prevent fraying and give it a nice, finished look. Try on your new stringer shirt, and enjoy the fruits of your labor!

Don't forget to adjust the pattern for future stringers to better fit your measurements. Keep experimenting with different fabrics and designs. Who knows, you might end up with a whole collection of handmade stringer shirts! Happy sewing!

AD