how to make a shock pen

Step-by-Step Guide: How to Make a Shock Pen

By Ashley Williams
AD

Are you looking to add a wow factor to your presentation or performance? A shock pen, with its dramatic ink change, can be the perfect tool to captivate your audience. Not only is it visually stunning, but it's also surprisingly easy to make. Let's dive into a step-by-step guide on how to create your own shock pen at home.

Before we begin, make sure you have all the necessary materials. You'll need a standard ballpoint pen, bleach, a queen-of-the-past (an ancient coin or any small, dense object), and some patience. Safety first, so put on some gloves and work in a well-ventilated area because bleach can be harsh. Now, let's get started!

Preparing the Pen Ink

The secret to a shock pen lies in the ink. To achieve the dramatic color change, we'll be using bleach to oxidize the ink. If your pen leaks easily, consider using a syringe to fill it back up later.

AD
a hand holding a pen with the words diy shock pen
a hand holding a pen with the words diy shock pen
Make a Sprunki Pen That Will SHOCK Your Friends!
Make a Sprunki Pen That Will SHOCK Your Friends!
I made simple Shocking Pen DIY
I made simple Shocking Pen DIY

First, remove the ink cartridge from the pen. Be careful not to squeeze it too much to avoid leaks. Then, drill a small hole into the cartridge, just large enough for the bleach to enter. If your cartilage is not removable, you can use the needle kit provided with the pen with the safety cap removed.

Adding the Bleach

Now, carefully pour a small amount of bleach into the hole, only about half of the ink. Be sure not to overfill it, as this could cause damage to your pen or create leaks. If you're using a syringe, you can fill it with bleach and insert it into the cartridge, pushing the bleach in gently.

How to make a SHOCKING PEN
How to make a SHOCKING PEN
Make your old pen an electric shock pen - COOL GADGET
Make your old pen an electric shock pen - COOL GADGET

If the ink starts to change color immediately and the pen becomes hard to write with, don't worry. This is a normal reaction when the bleach and ink mix. Just let the pen sit for a few hours to allow the two to settle.

Designing the Weight Shift

The queen-of-the-past comes into play here. To create the 'shocking' effect, we need to shift the weight of the pen. By placing the coin at the opposite end of the ink cartridge, the pen will flip when tilted, causing the ink to move around.

AD

First, carefully remove the pen's exterior. You can do this by gently pulling the two parts apart or using a spray can of lubricant to loosen the grip. Once separated, insert the coin into the pen's back end. Make sure it's secure, but not so tight that it can't move freely.

Testing and Refilling the Pen

Now that you've prepped your pen, it's time to test it out. Twist the pen to let the ink settle at the bottom. Then tilt it upside down. If everything's working correctly, the pen should flip when you turn it, causing the ink to change color dramatically.

However, if the ink doesn't change or the pen doesn't flip, try adjusting the weight of the pen by adding or removing the coin, or use a different coin. You might also need to prime the pen by turning it upside down several times to get the ink flow started.

AD

Reassembling and Using Your Shock Pen

Once you've got the perfect flip, it's time to put the pen back together. Gently twist the two halves of the pen back together, making sure the coin is secure but not too tight. Now, your shock pen is ready to astound!

To use it, simply twist the pen to let the ink settle at the bottom, then tilt it to reveal the color change. Remember, the effect will only last as long as there's bleach left in the pen, so store it with the ink at the bottom to preserve the bleach.

Creating a shock pen is a fun and rewarding project that always impresses. With a little patience and precision, you can make a special gift or a crowd-pleasing trick. Happy crafting!

AD
AD