how to make a ring out of coins

Turn Coins into Treasure: How to Make a Ring

By Andrew Rodriguez
AD

Transforming loose change into a personalized ring can be a fun and rewarding DIY project. Not only will you create a unique piece of jewelry, but you'll also learn a new skill and give new life to those forgotten coins stashed in your piggy bank. Here's a step-by-step guide on how to make a ring out of coins.

Before we dive in, let's ensure you have the right tools and that this project is suitable for your skill level. You'll need a few basic materials and some patience, as this process involves careful planning and execution.

Materials and Tools

Gathering the right materials is crucial for a successful coin ring project. The most important is, of course, your chosen coins. For a traditional coin ring, people often use Liberty Head or Indian Head pennies. However, you can use any denomination or type of coin that you find visually appealing.

AD
Coin Ring Making | 10 Rupee Coin Ring Making | #handmade #shorts #viralvideo #ring
Coin Ring Making | 10 Rupee Coin Ring Making | #handmade #shorts #viralvideo #ring
How to Make a Coin Ring From a Quarter : 8 Steps (with Pictures) - Instructables Making Rings Out Of Coins, Ring Made From A Coin, Homemade Diy Coin Ring, Rings Out Of Coins, Coins Made Into Rings, Diy Coin Ring, How To Make A Bullet Casing Ring, Diy Coin Ring Tutorial, Coin Ring Tools
How to Make a Coin Ring From a Quarter : 8 Steps (with Pictures) - Instructables Making Rings Out Of Coins, Ring Made From A Coin, Homemade Diy Coin Ring, Rings Out Of Coins, Coins Made Into Rings, Diy Coin Ring, How To Make A Bullet Casing Ring, Diy Coin Ring Tutorial, Coin Ring Tools
How to Make Coin Rings | DIY Rings | DIY Projects
How to Make Coin Rings | DIY Rings | DIY Projects

You'll also need the following tools and materials:

  • A coin punch or drill to create a hole in the coin
  • Files or a Dremel tool for shaping and smoothing the coin
  • A jeweler's saw to cut the coin in half
  • Tigersoft flux (optional, for soldering)
  • Solder and a small soldering iron
  • Ring mandrel (optional, but helpful for setting the ring size)

Designing Your Coin Ring

Before you start cutting and filing, plan the design of your coin ring. Decide which side of the coin you want to feature and whether you want to cut the coin in half to create a double-sided design. You can also choose to create a simple band by making a ring from a single, uncut coin.

Design A: Double-Sided Coin Ring

The double-sided coin ring is a classic design that allows you to showcase both the obverse (front) and reverse sides of your chosen coin. To create this design, you'll cut the coin in half using a jeweler's saw and then solder the two halves together around a ring mandrel.

When cutting, be sure to mark the coin on the edge where you want to make the cut, and use that line as a guide. Slow and steady sawing will help you achieve a clean cut. After cutting, clean up any rough edges using a file or Dremel tool.

AD

Design B: Single-Sided Coin Ring

For a single-sided coin ring, you'll use the coin as is, without cutting it in half. This design is simpler and quicker to make, as it only requires creating a hole in the coin and sizing the ring.

Choose which side of the coin you want to face out, and mark the center to determine where to drill the hole. Use a coin punch or drill bit slightly smaller than the thickness of the coin to create a clean, even hole.

Shaping and Sizing the Ring

With your coin prepared, it's time to shape and size the ring. This step helps ensure that your coin ring fits comfortably on your finger.

AD

Shaping the Coin

Use a file or Dremel tool to gently shape the edges of the coin. You can create a slight curve to make the ring more comfortable to wear, or you can round over the sharp edges to give it a softer, more worn look. Be careful not to file away too much material, as this can weaken the coin and make it prone to breaking.

If you're making a double-sided ring, remember to keep the edges of both halves identical so that the ring looks symmetrical when closed.

Sizing the Ring

To create a properly fitting ring, you'll need to size it to match the diameter of your finger. You can purchase a ring sizing gauge or use a homemade tool made from a strip of aluminum or plastic.

AD

Place the coin on the center of your sizing tool, and wrap the ends around your finger, making sure the coin overlaps the ends slightly. Mark the ends where they meet, then carefully cut the coin using your jeweler's saw or a metal-blade hobby knife.

Soldering the Ring

If you've created a double-sided coin ring, it's time to solder the two halves together. Clean the mating surfaces with tigersoft flux, then apply a small amount of solder to one of the halves. Use a small soldering iron to melt the solder, connecting the two halves of the coin and creating your ring.

Allow the soldered ring to cool completely before touching or handling it. Once cooled, use a file or Dremel tool to smooth any rough edges or excess solder.

Congratulations! You've now created a unique and personalized coin ring that you can wear with pride. Remember to store your coin ring carefully to prevent damage, and enjoy the compliments you'll receive whenever you wear your handmade jewelry.

If you found this guide helpful, share your finished coin ring on social media and tag us. We'd love to see your creations and inspire others to try their hand at this fun and rewarding DIY project. Happy coin ring crafting!

AD