How to Throw a Plate on the Pottery Wheel
Have you ever admired the artistry and craftsmanship of a perfectly centered, symmetrically shaped plate? The process of creating such a masterpiece begins with a simple mound of wet clay and a pottery wheel. If you're eager to learn how to make a plate on the wheel, you're in the right place. In this comprehensive guide, we'll walk you through the step-by-step process, from preparing your clay to trimming and stacking your finished plates.
Pottery, much like painting or sculpting, is a skill that improves with practice. Don't be discouraged if your first attempts aren't perfect. With each plate you create, you'll hone your skills and develop a unique style.
Preparation: Setting Up Your Workspace and Clay
Before you begin, ensure your workspace is clean and spacious enough for you to move freely around your wheel. Cover your work surface with a plastic sheet to make cleanup easier. Next, gather your materials: a bag of clay, a pottery wheel, water, a sponge, and a bucket for waste clay. Also, have nearby the tools you'll need, such as a wire for cutting, a rib for shaping, and a needle tool for trimming.
Knead your clay to remove any air bubbles and ensure it's evenly moist. To do this, roll and squeeze the clay until it's smooth and pliable. This step is crucial as it prevents your finished plate from cracking during the drying process.
Mounting the Clay on the Wheel
The first step in shaping your clay on the wheel is mounting it properly. Take a small piece of clay, roughly the size of a golf ball, and flatten it into a pancake shape. With the wheel spinning at a slow to medium speed, center the flattened clay onto the wheel's head. Gently press down to ensure it adheres securely.
Using your hands and a sponge, slowly form the clay into a cone shape. Keep the wheel spinning at a steady speed to maintain control over the clay. This initial formation helps create a symmetrical starting point for your plate.
Shaping the Plate
Now that you've got a cone, it's time to shape it into a plate. Place your thumbs on the top of the cone and press inwards while pulling upwards with your other fingers. This action opens up the cone's base, creating the beginnings of a plate shape. Keep your wheel spinning at a medium speed to maintain control.
Using your hands and a rib, carefully shape the plate. Squeeze the edges inward to increase the plate's depth and use the rib to smooth out the walls. Be mindful of maintaining a consistent wall thickness to ensure even drying and firing. As you shape, periodically stop the wheel, smooth the surface with your sponge, and check your plate's symmetry. Once you're satisfied with the shape, your plate is ready for trimming.
Trimming and Finishing Your Plate
Trimming is the final step in shaping your plate on the wheel. It involves removing excess clay from the plate's bottom, creating a foot (the bottom rim of the plate), and ensuring your plate sits level.
With the wheel spinning at a slow speed, use a needle tool to cut away excess clay from the plate's bottom. Be careful not to cut into the wheel head. Once you've removed the excess clay, use your hands and a spongeto smooth and round the plate's bottom edge to create a foot.
Creating a Foot for Your Plate
To create a foot, use your fingers to compress the bottom edge of the plate, pulling the clay downwards and outwards. This action creates a stable base for your plate. Use a wire or a rib to even out the foot, ensuring it's parallel to the plate's surface.
Finally, check your plate's levelness. Place a small tool or a knife blade against the foot and plate's surface. If the tool or blade doesn't wobble, your plate is level. If it does, adjust the foot until it's stable.
Cleaning Up and Caring for Your Finished Plate
After trimming, gently lift your plate off the wheel using a wire or your fingers. Allow it to dry slowly and evenly to prevent warping or cracking. To do this, place the plate on a flat surface and cover it with a plastic bag or a damp cloth.
As your plate dries, it may shrink slightly. Keep an eye on it, and if it starts to warp, remoisten it and reshape it before it dries completely. Once your plate is bone dry, it's ready for glazing and firing. Following these processes will transform your clay plate into a durable, functional piece of ceramic artwork.
Creating a plate on the wheel is a satisfying and rewarding experience. With each plate you make, you'll gain a deeper understanding of the material and improve your craftsmanship. So, turn on that wheel, dig your hands into the clay, and let your creativity guide you. Happy potting!"