DIY PVC Periscope: How to Make One Step by Step
Whether you're a curious DIY enthusiast or a teacher looking for a creative STEM project, constructing a periscope using PVC pipe can be an educational and enjoyable experience. PVC pipes, abundant and inexpensive, provide the perfect materials for building this classic optical device. Let's dive into a step-by-step guide to create your very own periscope, perfect for exploring the world from different perspectives.
The periscope, a staple of submarines and spy movies, works on the principle of total internal reflection. This means light traveling through one medium (like water or glass) is reflected back into that medium when it hits another medium (like air or another piece of glass) at a certain angle. In a periscope, this phenomenon allows us to see above or around obstacles without needing to position our eyes accordingly.
Gathering Materials and Tools
Before starting, ensure you have all the necessary materials and tools. Don't worry, as PVC pipes and other required items are commonly available at hardware stores or online.
Here's a list of what you'll need:
- PVC pipes (two 10-foot lengths of 3/4-inch schedule 40 pipe)
- PVC'Elbow (90-degree) tees (4)
- PVCociety end caps (4)
- PVCutter or hacksaw
- PVCement and primer
- Mirror (4x6 inches; mirrored bathroom medicine cabinet ones work well)
- Ruler or measuring tape
- Pencil
- Sandpaper ( fine grit)
- Optional: Additional PVC fittings for adding height or angle adjustments
Measuring and Cutting PVC Pipes
First, measure and mark the PVC pipes according to the following lengths:
- Two pieces at 20 inches each (vertical sections)
- Two pieces at 18 inches each (horizontal sections)
Use a PVCutter or hacksaw to cut the pipes cleanly along the marked lines. If you're using a hacksaw, you may need to deburr the edges with sandpaper afterwards.
Assembling the Periscope Frame
The periscope frame is made by connecting the PVC pipes and fittings. Start by applying PVCements and primer to the ends of your pipes and the inside of the PVC tee fittings. Then, insert the 20-inch vertical sections into the bottom of the tees, securing them tightly.
Next, connect the horizontal 18-inch sections to the top of the tees using the PVCcements and primer. Make sure the sections are perpendicular to the vertical pipes for proper alignment. Allow the glue to dry completely as per the manufacturer's instructions before proceeding.
Preparing the Mirror
A high-quality mirror is crucial for a functional periscope. Here, we'll use a 4x6 inch mirror, but you can adjust the size based on your preferences. If needed, carefully cut the mirror to the desired size using a glass cutter or purchase pre-cut mirrored tiles.
Mounting the Mirror
Measure and mark the center point of one of the 20-inch vertical pipes. This is where the mirror will be mounted to reflect the light towards the observer's eye.
Carefully apply a small amount of PVCements to the back of the mirror, ensuring it's centered and level with the marked point. Press firmly and hold for a few minutes to allow the glue to initial set. Allow the mirror to dry completely according to the manufacturer's instructions.
Testing and Adjusting
To test your periscope, position one end at a low angle, and look through the other end. You should be able to see an inverted reflection of the area in front of the first end. If the image is too dark or hard to see, you can adjust the periscope's angle or add additional mirrors or lenses (using acrylic or plastic material) to enhance light reflection.
If you'd like to create a more advanced periscope with adjustable height or angle, you can incorporate additional PVC fittings and pipes as extensions or use a flexible gooseneck attachment. Don't be afraid to experiment and customize your design!
Now that you've successfully built your very own periscope, go ahead and explore the world around you in a fun and unique way. Remember, the possibilities are endless when it comes to DIY projects, so keep learning, creating, and enjoying the inventor's journey!