how to make a paper clip jumper

Craft a Paper Clip Jumper: Step-by-Step Guide

By Jessica Lewis
AD

Ever found yourself in a pickle, needing a paper clip, but the stationery cupboard is as bare as a winter tree? Don't fret. Today, we're going to explore a creative and eco-friendly solution: making your own paper clip jumper, a.k.a. a chain of interconnected paper clips. Not only will you have a hands-on activity, but you'll also learn a fun trick to keep your desk organized.

Before we dive in, let's briefly discuss the benefits of this DIY project. It's environmentally friendly, reduces waste, and adds a unique touch to your desk. Plus, it's a great way to stay productive when you're between tasks. Now, let's roll up our sleeves and get started on how to create a paper clip jumper.

Gathering Your Materials

You're in luck as you only need one item: a paper clip. The larger the paper clip, the more prominent your jumper will be. You might need a flat surface and your fingers for this task, but that's all!

AD
How to Make Jump Rings from Paperclips Jewelry Making Tutorial
How to Make Jump Rings from Paperclips Jewelry Making Tutorial
How to make a Jumping Paperclip
How to make a Jumping Paperclip
a hand holding a wooden stick with a small animal on it's face next to a cup of yogurt
a hand holding a wooden stick with a small animal on it's face next to a cup of yogurt

Once you have your paper clip, ensure it's straight and not bent in any way. A straight paper clip will make the process easier and create a better-looking jumper.

Straightening the Paper Clip

If your paper clip isn't straight, you can easily fix this by gently pulling both ends in opposite directions until it's straight. Be careful not to stretch it too much, as this could make it brittle and prone to breaking.

DIY Paperclip Hangers
DIY Paperclip Hangers
Tutorials for Doll Customizers
Tutorials for Doll Customizers

Alternatively, you can use a flat surface and the side of a table or desk to straighten the paper clip. Place the bended part of the paper clip on the edge, then apply gentle pressure as you slide it across. This method works well for gently stubborn bends.

Bending the Paper Clip

Now that your paper clip is straight, it's time to bend it into the first link of your jumper. Hold the paper clip between your thumb and index finger, about an inch from one end. Apply gentle pressure, bending the paper clip at a 90-degree angle. If you're struggling, you can use a table edge or the corner of a book as a guide.

AD

After bending, ensure the first link is even and neat. In the next step, you'll start connecting paper clips together, so an even bend will make the process smoother.

Connecting the Paper Clips

With your first paper clip link ready, it's time to start creating the chain. You'll need a good grip and a steady hand for this part. Remember, the key to a successful paper clip jumper is patience and precision.

If you're right-handed, hold the first link in your left hand, with the bent part facing you. If you're left-handed, reverse this. This will make it easier to grip the paper clips as you connect them.

AD

Looping Through the First Link

Take a new, straight paper clip and hold it with the open end facing the bent part of the first link. Gently push the straight paper clip through the loop, using your thumb and index finger for support.

Once the straight paper clip is through, fold it back on itself, creating another link in the chain. Ensure the second link is bent at a 90-degree angle, like the first one.

Continuing the Chain

Now that you've connected the first two links, it's time to keep the chain going. To add a new link, hold the previous link with the open end facing you. Take a new, straight paper clip and push it through the loop, then fold it back on itself.

AD

Repeat this process, adding one link at a time, ensuring each link is neat and even. As the chain grows longer, you can wrap it around your wrist or a flat surface to make the process easier. Remember, there's no rush, so take your time and enjoy the process.

Creating Different Shapes

Once you've mastered the basic paper clip jumper, you can get creative and experiment with different shapes and designs. You can create a customizable paper clip jewelry chain, a bookmark, or even a paper clip Eiffel Tower!

To create different shapes, you'll need to form the paper clip links at different angles. For example, to create a heart, you'll need to form some links at a 45-degree angle, while others will remain at 90 degrees. You can use templates or online tutorials to help you visualize the designs.

Tips for Better Results

When creating your paper clip jumper, remember to work slowly and steadily. Rushing can lead to broken paper clips and an imperfect chain. Also, use good quality paper clips. Cheap or low-grade paper clips are more likely to break or bend inefficiently.

If you find the process too challenging, take a break. There's no need to force the connections. If a link isn't working, carefully remove it and try again. The goal is to enjoy the process and create a paper clip jumper you're proud of.

Now that you know how to make a paper clip jumper, it's time to grab a paper clip and start creating. Remember, every paper clip jumper is a unique piece of art, and the more you practice, the better you'll get. Happy crafting!

AD