How to Make a Motorcycle Stand
Tired of struggling with your motorcycle's stability during maintenance or storage? A motorcycle stand is an essential accessory that allows you to safely work on or display your bike. This article will guide you through step-by-step instructions on how to make a simple yet effective motorcycle stand at home, enabling you to save money and learn a new DIY skill.
Before we dive into the tutorial, let's first understand the benefits of using a motorcycle stand. A well-designed stand offers stability, preventing your bike from falling over or becoming damaged. It also elevates the bike, providing easier access to various components, and helps maintain the tires in pristine condition by keeping them off the ground.
Materials and Tools You'll Need
Creating a motorcycle stand requires minimal materials and tools, which are likely already available in your home workshop:
- Four 2x4 pressure-treated or cedar lumber boards (8 feet long each)
- Two 4x4 pressure-treated or cedar lumber posts (8 feet long each, optional)
- Two 2x6 pressure-treated or cedar lumber boards (8 feet long each)
- 2-1/2" deck screws
- 2-1/2" outdoor wood glue
- Tape measure
- Circular saw
- Drill
- Socket wrench (optional, for assembly)
Step 1: Measure and Cut the Boards
Start by measuring and cutting the 2x4 boards to specific lengths to create the main structure of the motorcycle stand:
- Cut eight 16" sections from the 2x4 boards
- Cut four 22" sections from the 2x4 boards
The 2x4 boards will serve as the base, legs, and supports for your motorcycle stand.
Step 2: Assemble the Base and Legs
Using the 2-1/2" outdoor wood glue and 2-1/2" deck screws, assemble the base of the motorcycle stand:
1. Arrange four of the 16" sections in a square formation, ensuring the edges are flush.
2. Drill four pilot holes through each end of the 16" sections, and secure them together using the deck screws and a socket wrench (if desired).
The base of your stand is now complete, providing a stable foundation for the motorcycle stand.
Building the Motorcycle Stand Frame
Now that the base is assembled, it's time to construct the frame that will secure your motorcycle in place.
Step 3: Create the Upright Supports
Using two of the pre-cut 2x4 boards (22" sections), create the upright supports that will carry the weight of your motorcycle:
1. Line up the 22" sections with the base, placing them approximately 12" away from each other.
2. Drill pilot holes through the base and the upright supports, and secure them together using the deck screws. Make sure to countersink the screws for a smooth, final appearance.
Step 4: Attach the Motorcycle Cradle
The motorcycle cradle consists of the remaining 16" and 22" sections, as well as the optional 4x4 posts (if using). Create the cradle by following these steps:
1. Cut two of the 16" sections in half, resulting in four 8" sections. These will serve as the sides of the cradle.
2. If using 4x4 posts, cut them into four equal sections (around 18" each) and position them between the upright supports, ensuring they are flush with the top of the 2x4 boards.
3. Attach the four 8" sections to the upright supports and the optional 4x4 posts using wood glue and deck screws. Make sure the cradle is parallel to the ground and about 16" above the base.
Final Touches and Safety Considerations
With the motorcycle stand assembled, there are a few final touches and safety considerations to keep in mind:
Step 5: Stain or Paint the Motorcycle Stand
To protect the wood from moisture, insects, and UV damage, apply a thick coat of exterior wood stain or paint to the motorcycle stand. Allow the finish to dry completely before using the stand.
Step 6: Ensure Stability and Safety
Before placing your motorcycle on the stand, inspect it for any loose screws or wobbles. Make sure the tires fit snugly within the cradle, and place a piece of non-slip material on the cradle's base to prevent shifting. Always supervise young children or pets around the motorcycle stand to ensure their safety.
Creating a custom motorcycle stand allows you to maintain and store your bike with ease. With the right materials and tools, you can construct a durable and reliable stand in your home workshop. Grab your safety gear, and start building your perfect motorcycle stand today!