how to make a leather axe sheath

Crafting a Leather Axe Sheath: A Step-by-Step Guide

By James Clark
AD

Creating a durable and attractive leather axe sheath is a rewarding project that combines craftsmanship, skill, and a touch of artistry. A well-made sheath not only protects your axe's handle and edge but also adds a personal touch to your tool. Let's delve into the process of crafting a leather axe sheath, ensuring your work is both functional and visually appealing.

Before we begin, gather your materials: full-grain leather, a leatherworking blade, leatherworking awl, leather needle and thread, leather conditioner, beeswax, a hole punch, a ruler, and a pen. You'll also need an axe or axe head as a template. For this guide, we'll focus on making a simple, drop-loop sheath that fits an average-sized axe.

Preparing Your Leather and Template

The first step is to choose the right leather. Vegetable-tanned full-grain leather is ideal for this project. It's durable, can be dyed and finished beautifully, and accepts tooling well. Cut your leather following the pattern below: a 9" x 7" piece for the main body and two 2" x 3" pieces for the belt loops.

AD
How To Make Leather, Leather Sheath, Bushcraft, Leather Working, The Creator, Leather
How To Make Leather, Leather Sheath, Bushcraft, Leather Working, The Creator, Leather
a person is holding a piece of wood in their hand and it looks like an origami
a person is holding a piece of wood in their hand and it looks like an origami
How one guy makes an axe sheath.....
How one guy makes an axe sheath.....

Trace your axe head's outline onto the main leather piece, ensuring you include the entire length and width. This will serve as your pattern. Mark the handle's centerline to ensure your final sheath is symmetrical.

Marking and Cutting the Leather

Using a leatherworking blade, carefully cut along the traced lines. Be gentle to avoid uneven edges. For the belt loops, cut out the 2" x 3" pieces and punch holes at the top for riveting. These loops will be attached to the main piece later.

How to Make a Leather Sheath for a Hatchet
How to Make a Leather Sheath for a Hatchet
the tools are laying on the table ready to be used in making leather gloves and boots
the tools are laying on the table ready to be used in making leather gloves and boots

With the main piece, mark the edges for stitching. Here, we'll use the traditional method of "turning the edges," where you'll turn under the raw edge of the leather to create a clean, finished edge. Mark the folded edge 1/4" in from the outer edge.

Marking and Punching Holes for Stitching

Using a leatherworking awl, scratch a line around the marked edge. This line will guide your hole punching. Punch holes along this line, spacing them about 1/8" apart. Be consistent with the hole placement to ensure an even stitch.

AD

Punch holes along the centerline as well, spacing them evenly. These holes will accommodate the axe head's thickest part. Make sure to punch a hole at the top for the lacing cord or loop used to secure the axe.

Sewing the Sheath Together

Before sewing, condition your leather to make it more flexible. Mortise and stitch the two edges together using a leatherworking needle and a heavy-duty waxed thread. To mortise, pass the needle through the edge of one piece, then through the edge of the other, creating a lock stitch.

Stitch along the marked lines, being careful to keep your stitches even. Use a lacing stitch for the centerline to accommodate the axe head's thickness. Once stitched, use a bone folder or a spoon to crease the edges for strength and a cleaner finish.

AD

Attaching the Belt Loops

Lay out the belt loops and mark where they'll be attached to the main piece. Punch holes through both layers, then rivet the loops in place. Make sure the loop's opening faces outwards and follows the curve of the axe head.

Use the same lacing stitch to create a loop at the top of the sheath for securing the axe. You can also choose to make a simple cord loop or a throat lace using leather cord and a small metal toggle.

Finishing Touches

With the sewing complete, use a leatherworking blade to carefully shave or sand any rough spots or burrs. Apply leather conditioner, allowing it to soak in and absorb. Buff out any excess with a soft cloth.

AD

For a final touch, burnish the edges using a leather burnisher and beeswax to create a smooth, rounded edge. This not only looks professional but also helps protect the edges from fraying.

Your new leather axe sheath is now complete! soinves versatile protection for your axe while adding a touch of personal style. Enjoy showcasing your handiwork while maintaining a well-protected and sharp axe. Happy leatherworking!"

AD