how to make a go board

How to Make a Go Board

By Olivia Jackson
AD

Crafting your own Go board can be a rewarding endeavor, not only will you have a unique game piece, but you'll also appreciate its beauty and value. Go, also known as Baduk or Weiqi, is an ancient strategy game originating from China over 2500 years ago. It's played on a grid, and while you can purchase a Go board, making your own can be just as enjoyable. This article will guide you through the process, step by step.

Making a Go board is abler project that requires patience, some basic carpentry skills, and woodworking tools. If you're new to woodworking, don't worry! This guide is designed to help you create the perfect Go board for your needs.

Materials Needed

To create a Go board, you'll need the following materials:

AD
How to Make a Go Board — 3x3 Custom
How to Make a Go Board — 3x3 Custom
From cardboard to a geoboard! With Makedo Tools
From cardboard to a geoboard! With Makedo Tools
How to Play Go: Setup, Strategy & Gameplay Explained
How to Play Go: Setup, Strategy & Gameplay Explained
  • Wood: A hardwood like maple, walnut, or cherry works well. Ensure it's free from knots and has a consistent grain pattern.
  • Sandpaper: A variety of grits, typically 120, 180, 220, and 320.
  • Тойtools: A circular saw or jigsaw, clamps, screwdriver or drill, and wood glue.
  • Finish: Tung oil, varnish, or a combination of both works best for a long-lasting, protective finish.

Choosing the Right Wood

Selecting the right wood is crucial for crafting a durable and visually appealing Go board. Hardwoods like maple or walnut provide a smooth surface for the game pieces and are resistant to wear and tear. Avoid softwoods like pine, as they can warp and the surface may not be smooth enough for the game.

Ensure the wood is at least 1 1/2 inches thick to accommodate the game's lines, and choose a single piece without knots or large grain patterns for a consistent and elegant look.

Homemade Go Board
Homemade Go Board

The boards Size and Details

The standard Go board size is 19x19 lines, which are 1/4 inch wide and 1 1/2 inches apart. This size works for most players and can be adjusted based on your preference. We'll use the 19x19 size as an example in this guide.

_first, you'll need to cut the wood to the desired board size, which is 19 1/2 inches by 19 1/2 inches for a 19x19 board. Use a circular saw or jigsaw to make the cuts, ensuring the edges are as smooth and straight as possible.

AD

Marking the Lines

Once the board is cut to size, it's time to mark the lines. Using a ruler and pencil, draw the lines 1 1/2 inches apart vertically and horizontally. You'll have 19 lines in each direction, with the starting point in the center of the board.

To ensure accuracy, draw a centerline both vertically and horizontally. This will serve as the midpoint for your 19 lines. You can also use a speed square or T-square to ensure the lines are straight and perpendicular to the edges.

Carving the Lines

Now that you have the lines marked, it's time to carve them into the wood. Using a sharp chisel and a mallet, carefully follow your lines, cutting about 1/4 inch into the wood. Be extremely cautious while carving to avoid damaging the board or causing injury.

AD

Take your time and make careful passes with the chisel. If you make a mistake, don't worry! Many beautiful Go boards have imperfections that add to their character. Once you've carved all the lines, sand the board to smooth any rough edges.

Preparing the Board for Finish

Before applying the finish, sand the board thoroughly using a progressive grit sequence, starting with 120 grit and moving up to 320 grit. This will help achieve a smooth, even surface that allows the finish to be absorbed evenly.

Sanding the Board

Begin sanding with 120 grit sandpaper to remove any rough spots or edges. Use a circular motion, ensuring you sand the entire surface, including the inside of the carved lines. Be careful not to sand too aggressively, as this can damage the wood.

AD

Once you've sanded with 120 grit, continue with 180, 220, and finally 320 grit sandpaper. Between each grit, wipe the board clean with a damp cloth to remove any dust. This will help maintain the smoothness of the surface and prevent any grit from becoming embedded in the wood.

Applying the Finish

With the board thoroughly sanded, it's time to apply the finish. I recommend using a combination of tung oil and varnish, as this provides a beautiful, protective finish that enhances the wood's natural grain. Other finishes like lacquer or polyurethane can also be used, but may not provide the same level of protection or natural appearance.

Begin by applying a generous coat of tung oil using a clean cloth or brush. Allow the oil to soak into the wood for about 15-30 minutes, then wipe off any excess with a clean cloth. Allow the board to dry completely before applying a second coat.

Once the second coat of tung oil has dried, apply a coat of varnish using a brush. Allow the varnish to dry according to the manufacturer's instructions, then lightly sand the board with 320 grit sandpaper. Wipe the board clean and apply a second coat of varnish. This will provide a durable, protective finish that will last for years to come.

Congratulations! You've crafted your very own Go board. Now you can enjoy playing Go with your friends and family on a board that you created yourself. The sense of accomplishment and pride you'll feel is immeasurable. Happy playing, and remember to take care of your board - it's a labor of love that will last a lifetime.

AD