how to make a finger surfboard

"DIY Finger Surfboard: Step-by-Step Guide"

By Christopher Martin
AD

Ever dreamt of skimboarding like a pro on your handmade surfboard? Making a finger surfboard, also known as a skimboard, is an exciting and rewarding DIY project. Not only does it allow you to create a personalized water sports equipment, but it also helps you understand the craftsmanship behind these boards. So, let's dive into theStep-by-step guide on how to make a finger surfboard.

Before you start, ensure you have the necessary materials and tools. Here's a list to get you started:

Materials and Tools

Gather your materials and tools for a smooth workflow:

AD
finger-surfboard!
finger-surfboard!
😍🫧🏄🏻‍♀️ Cardboard SURFboards 🐬🌊 DIY Summer Beach Craft Idea 🌺 Tutorial #diy #surf #craft
😍🫧🏄🏻‍♀️ Cardboard SURFboards 🐬🌊 DIY Summer Beach Craft Idea 🌺 Tutorial #diy #surf #craft
the ultimate summer activity
the ultimate summer activity
  • A foam blank suitable for skimboarding (usually around 3/4" thick)
  • Plastic or PVA raking fins
  • Epoxy resin and hardener
  • Safety gear (gloves, goggles, and respiratory mask)
  • Sandpaper (80, 120, 220, and 320 grit)
  • Surfboard tail tape and fiberglass cloth (choose compatible sizes)
  • Scissors or a utility knife
  • Squeegee and mixing cups
  • Rubber gloves
  • Wedges or clamps
  • Sandable primer and paint (optional, for customizing your board)

Preparing Your Foam Blank

Begin by trimming your foam blank to your desired shape and size, keeping in mind a skimboard's typical width and rounded nose.

Using 80-grit sandpaper, roughly shape your foam blank. Once you've achieved the desired outline, refine your shape with 120-grit sandpaper.

Your sign to make a finger surfboard 🌺
Your sign to make a finger surfboard 🌺
DIY finger surfboard 🏄‍♀️
DIY finger surfboard 🏄‍♀️

Applying Epoxy Resin

Prepare your epoxy resin according to the manufacturer's instructions, ensuring an accurate mix of resin and hardener.

Apply a thin layer of epoxy to the top and bottom of your foam blank, smoothing it out with a squeegee or roller. Allow it to cure for around 24 hours.

AD

Adding Fins and Glassing

Once the initial epoxy layer has cured, it's time to add your fins and reinforce your board with fiberglass.

Installing Fins

Choose a center point for your main fin, then measure and mark the side fin positions. Ensure they're equidistant from the center fin and around 2-3" from the tail edge.

Trace the fin contours onto the board, then use a utility knife or drill to scored or cut out the fin channels. Apply epoxy to the fin bases and insert them into the channels, ensuring a snug fit. Allow the epoxy to cure, following the manufacturer's guidelines.

AD

Glassing Your Board

Measure and cut fiberglass cloth to fit your board, trimming the edges to allow for a 1" overlap. Apply epoxy to the board's surface, then lay on the fiberglass. Use a squeegee or roller to ensure proper adhesion and work out any wrinkles.

Once the fiberglass is laid up, apply a second layer of epoxy to the board's surface. Allow it to cure for around 24 hours.

Sanding and Finishing

After the epoxy has cured, it's time to sand your board to a smooth finish, preparing it for painting and final touches.

AD

Progressive Sanding

Begin with 80-grit sandpaper, focusing on flattening out any rough areas or bumps. Progressively move through finer grits (120, 220, and 320) until you achieve a smooth, glossy finish.

If desired, apply a sandable primer to your board, followed by your chosen paint color. Allow the paint to dry, then lightly sand it with 320-grit sandpaper to prepare it for a final wax application.

There you have it – a custom-made finger surfboard ready to hit the flats or the waves! Regular maintenance, such as waxing and periodic sanding, will keep your board in top shape. Embrace the process, have fun, and enjoy your handmade skimboarding experience.

AD