How to Make a Chainsaw Mill
Ever dreamt of transforming your felled trees into beautiful, usable timber? Well, now you can, using a simple yet powerful tool - a chainsaw mill. This versatile attachment turns your chainsaw into a mobile bandsaw mill, allowing you to saw logs into planks or lumber right where they're cut down. But how do you make one? Let's dive into this step-by-step guide to help you create your very own chainsaw mill.
Before we begin, it's important to note that while this project is feasible, it requires a good understanding of metalwork, welding, and chainsaw safety. Always prioritize safety first, wear appropriate personal protective equipment (PPE), including a chainsaw helmet with a visor and hearing protection, sturdy boots, and work gloves.
Materials and Tools Needed
Gathering the right materials and tools is crucial for a successful project. Here's a list of what you'll need:
- Chainsaw (preferably with a 20" bar or longer)
- Aluminum or steel tubing (1.5" or 2" diameter)
- Angle iron or flat bar steel (2" x 3" or 2" x 4")
- Welding kit (MIG or TIG welder, safety gear, and gas if needed)
- Tape measure
- Marker pen
- Drill (with appropriate drill bits)
- Hacksaw or metal cutting blade
- Grinder (with cutting and finishing discs)
- vise
- Clamps
- Assorted bolts, nuts, and washers
- Grill-style hardware for cutting guide
Design and Preparation
Before diving into the welding, plan your design. The most basic chainsaw mill consists of a tube frame with a moving carriage and a cutting guide. The frame should be wide and sturdy enough to support the log you're cutting. A simple square or rectangular frame works well, with the chainsaw bar's length and height determining the frame's size.
Once you've designed your frame, measure and cut the tubing. Use a hacksaw or metal cutting blade to make clean, precise cuts. If needed, use a grinder to smooth any rough edges or burrs. Meanwhile, cut the angle iron or flat bar steel into pieces for the supports, carriage, and cutting guide.
Assembling the Frame
With your materials cut to size, it's time to start welding. Begin by welding the corners of the frame together. Ensure the frame is square by measuring diagonally from corner to corner; if the measurements are equal, your frame is square. If not, adjust your frame until it is.
Next, weld the supports in place. These should be around the height of your chainsaw bar, and they'll serve as the base for your carriage. Make sure they're secure, as they'll bear the brunt of the cutting force.
Building the Carriage
The carriage supports the chainsaw and allows it to move back and forth while cutting. It should be made from angle iron or flat bar steel, and should be roughly the length of your chainsaw bar plus the width of your desired plank.
Cut a slot in the center of the carriage to accommodate your chainsaw bar. The size of this slot will depend on your chainsaw model. Once the slot is cut, weld a support plate on the underside of the carriage to reinforce it. This plate should have a groove to allow the chainsaw bar to move freely.
Creating the Cutting Guide
The cutting guide helps maintain a consistent depth while cutting and ensures straight, even planks. It can be made from grill-style hardware, with bars spaced according to your desired plank thickness.
Weld two support pieces to the frame, one on each side of the log. These should be high enough to support the cutting guide without interfering with the chainsaw's movement. Then, weld the cutting guide in place, ensuring it's perfectly perpendicular to the frame.
Finishing Touches
The final step is to attach the carriage to the frame. This can be done with bolts, allowing the carriage to move smoothly back and forth. Ensure the carriage moves freely, with no binding or snagging, and that it's aligned with the cutting guide.
Before using your chainsaw mill, test it on a scrap piece of wood. Adjust any issues, tighten bolts as needed, and ensure everything works smoothly. Once you're satisfied, it's time to start milling those logs into beautiful lumber!
Happy sawing, and remember, safety always comes first. With your new chainsaw mill, you're now ready to transform your felled trees into functional and appealing timber. So, get out there, be creative, and enjoy the process!