how to lower ram speed in bios

How to Reduce RAM Speed in BIOS

By Melissa Moore
AD

Lowering RAM speed in BIOS might seem counterintuitive, but it can be useful for stabilizing overclocked systems or reducing power consumption. Here's a step-by-step guide to help you navigate this process safely and effectively. Remember, improper BIOS adjustments can lead to system instability, so proceed with caution.

Firstly, let's understand that RAM speed, or memory frequency, is determined by the Command Rate (CR), CAS Latency (CL), and other timings. Lowering these values can decrease the overall speed, but it's crucial not to push them too far, as it can cause system issues.

Accessing BIOS Settings

To lower RAM speed, you'll need to enter the BIOS/UEFI settings. The exact steps vary by manufacturer, but here are general instructions:

AD
How to Upgrade Your Laptop RAM: A Step-by-Step Guide
How to Upgrade Your Laptop RAM: A Step-by-Step Guide
How to Test RAM Speed
How to Test RAM Speed
Increase VIDEO RAM GRAPHICS Without Any Software | BOOST FPS | INCREASE PC PERFORMANCE
Increase VIDEO RAM GRAPHICS Without Any Software | BOOST FPS | INCREASE PC PERFORMANCE

1. Power on your computer. As soon as you see the manufacturer's logo (like Dell, ASUS, or Lenovo), press the key shown on the screen to enter BIOS. Common keys are F2, Del, Esc, or F10/12.

Locating the Advanced Menu

Once in the BIOS, you'll need to find the Advanced menu, often marked as AIOverclock, AI Tuning, or something similar. It might take some navigation, so use the arrow keys and press Enter to select options.

Your RAM is slower than you think — unless you enable this setting
Your RAM is slower than you think — unless you enable this setting
How to Fix: Newly Built PC - Ram Slots A1 and A2 Not Working/Sticks Not Lighting Up
How to Fix: Newly Built PC - Ram Slots A1 and A2 Not Working/Sticks Not Lighting Up

Here's an example of what you might see in an ASUS motherboard BIOS:

  • Advanced > AI Overclock > AI Suite III
  • Advanced > RAM Configuration > XMP / DDR4 / SPD

Identifying Your Memory Settings

Look for options related to your RAM's frequency, such as XMP (for high-end modules) or DDR4/DDR3 settings. You might find a list of pre-set speeds and timings, or manual settings for you to adjust.

AD

For instance, if you want to lower your 3200MHz RAM to 2933MHz, look for the appropriate option and adjust it accordingly.

Fine-tuning RAM Timings

If your motherboard allows, you can fine-tune your RAM's timings to further lower its speed. This process is more involved and requires careful consideration to achieve stability.

Understanding Timings

Primary timings include Command Rate (CR), CAS Latency (CL), tRCD (Row Access to Column), tRP (RAS Precharge), and tRAS (RAS Active). Lowering these values generally decreases speed but improves stability.

AD

Start by adjusting the CL value, as it's the most impactful. For example, lowering CL16 to CL18 will decrease speed but might improve stability. Next, adjust tRCD and tRP in tandem, keeping tRCD higher than tRP. Finally, adjust tRAS if necessary.

Stabilizing Your System

After adjusting your RAM settings, save and exit the BIOS. Your computer will boot, hopefully with your new, lower RAM speed. If you encounter errors or a failed boot, try increasing your timings slightly or restoring the default settings.

Consider running a stability test, like Prime95 with torture test or MemTest86, to ensure your system runs smoothly at the new speed.

AD

Lowering RAM speed can be a powerful tool for maintaining system stability, but it requires careful consideration and understanding of your hardware. Don't hesitate to seek professional advice or consult your motherboard's manual if you're unsure. Happy tweaking!

AD