how to lower ikea crib

Lower IKEA Crib: Expert Tips to Ensure Your Baby's Safety

By Daniel Jackson
AD

Lowering an IKEA crib is a common task for parents looking to prolong the life of their beloved furniture or create a cozier sleep environment for their little ones. This guide will walk you through the process step-by-step, ensuring your child's safety and comfort.

The IKEA crib you've chosen is not only stylish but also versatile, thanks to its adjustable height. With just a few simple tools and some elbow grease, you can lower your IKEA crib in no time. Let's dive into the process and ensure your child's sleep space is just right.

Gather Your Tools and Materials

Before you begin, gather all the necessary tools and materials to make the process as smooth as possible. You'll need:

AD
IKEA Sniglar Crib Hack: Convert Your Crib into a Toddler Bed with a Railing
IKEA Sniglar Crib Hack: Convert Your Crib into a Toddler Bed with a Railing
The day finally arrived...
The day finally arrived...
Co-sleeper in ledikantformaat zelf maken: waarom en hoe wij het deden - Tussen dromen en leven
Co-sleeper in ledikantformaat zelf maken: waarom en hoe wij het deden - Tussen dromen en leven
  • A Phillips head screwdriver
  • An Allen wrench (usually included with your IKEA crib)
  • Four new adjustable crib mattress supports (usually included with your crib or available for purchase)
  • Optional: A socket wrench (for easier removal of the crib's legs)

Once you have all your tools and materials at hand, you're ready to begin lowering your IKEA crib.

Remove the Crib's Existing Hardware

Start by removing the existing hardware from the crib's legs. Use your Philips head screwdriver to loosen and remove the screws that secure the adjustable feet to the legs. Some IKEA cribs may have a different type of screw or bolt, in which case, you might need a socket wrench for easier removal.

Toddler Bed Hack: Transforming a Baby Bed with Simple Railing Cuts
Toddler Bed Hack: Transforming a Baby Bed with Simple Railing Cuts
a small wooden crib sitting on top of a hard wood floor next to a wall
a small wooden crib sitting on top of a hard wood floor next to a wall

If your crib has the Kingsley or Staven style legs, you'll instead need to remove the Allen key bolts. To do this, insert the Allen wrench into the hole on the inside of the leg, and turn it counter-clockwise to loosen and remove the bolt.

Assemble the New Hardware

Now that the old hardware is removed, it's time to assemble the new, adjustable crib mattress supports. Each support comes with a bracket and two screws. Attach the bracket to the support using the two screws, making sure it's securely fastened.

AD

Your new hardware is now ready to be installed onto your crib's legs.

Attach the New Hardware to the Crib's Legs

To attach the new hardware, line up the end of the adjustable crib mattress support with the bottom of your crib's leg. Make sure the bracket is facing the correct direction, with the slot for the screw facing upwards.

Using your Philips head screwdriver, loosely attach the support to the leg using the same screw holes that held the old hardware. It's essential to keep the support loose at this stage to allow for easier height adjustments.

AD

Lower the Crib's Height

Once you've attached the new supports to all four legs of your IKEA crib, it's time to lower the crib's height. To do this, turn the screw on the adjustable crib mattress support counter-clockwise, lowering the support until it's about 1/4 inch from the floor.

It's crucial to ensure that the crib's height is low enough to prevent your child from climbing out or getting their limbs stuck between the crib and the floor. The mattress should be no more than 26 inches from the top of the crib rails to minimize the risk of entrapment.

Secure the New Hardware in Place

With the crib lowered to the desired height, it's time to secure the new hardware in place. Tighten the screws on the adjustable crib mattress supports using your Philips head screwdriver, ensuring they're secure but not overtightened.

AD

giving them a firm tug to ensure they're secure. At this point, your IKEA crib is now safely and securely lowered, ready to provide a cozy and safe sleep environment for your little one.

Test the Crib's Stability and Safety

Before placing your baby back in the crib, it's essential to test its stability and safety. Give the crib a gentle shake to ensure it doesn't wobble or feel unsteady. The crib should feel firm and secure, with no noticeable movement.

Additionally, double-check that the mattress is secure and fits snugly within the crib frame. The mattress should not be too small, as this could create a hazardous gap between the mattress and the crib's side rails.

Create a Safe Sleep Environment

Lowering your IKEA crib is just one aspect of creating a safe sleep environment for your baby. To maximize your child's safety, always follow the American Academy of Pediatrics' safe sleep guidelines:

  • Place your baby on their back for every sleep, including naps and at night
  • Use a firm, flat sleep surface covered by a fitted sheet that meets current safety standards
  • Remove soft bedding, toys, and other objects that could potentially suffocate your baby
  • Share your room with your baby for the first 6 to 12 months of their life, but place them in their own separate sleeping surface

By following these guidelines and keeping your IKEA crib lowered to the appropriate height, you can create a safe and comfortable sleep environment for your little one.

Congratulations on successfully lowering your IKEA crib! By following this comprehensive guide, you've ensured your child's sleep space is safe, comfortable, and just right for their growing needs. As your baby continues to grow and develop, remember to periodically review and adjust the crib's height to maintain the optimal sleep environment. Sweet dreams!

AD