how to loosen a union fitting

Loosen Up: Mastering Union Fittings in aSnap

By Thomas Jackson
AD

Loosening a union fitting can be a simple task once you understand the technique. If not done correctly, it can lead to frustrated hours of wrenching and potential damage to the fitting. Let's delve into the simple steps and best practices to loosen a union fitting with ease.

Before we begin, it's crucial to have the right tools. You'll need a pipe wrench or basin wrench, depending on the location of the fitting, and a bit of grease or anti-seize compound to lubricate the fitting. Let's start by discussing how to prepare for the task at hand.

Preparation: Gathering Tools and Lubrication

starteteFirst, assess the location and accessibility of the fitting. If it's in a tight space, a basin wrench might be more suitable than a pipe wrench. The basin wrench's leverage can help you apply the necessary torque even in cramped quarters.

AD
How to Loosen a Stuck Plastic Pipe Fitting
How to Loosen a Stuck Plastic Pipe Fitting
a person holding a piece of white material in their left hand, with the tip of a knife sticking out of it
a person holding a piece of white material in their left hand, with the tip of a knife sticking out of it
How to Replace Check Valve on Well Pump
How to Replace Check Valve on Well Pump

Secondly, apply grease or anti-seize compound to the fitting's threads. This helps to prevent the fitting from seizing up over time and makes it easier to loosen. Apply the lubricant sparingly, as too much can attract dirt and debris, which can ultimately cause the fitting to seize.

Using a Pipe Wrench

Pipe wrenches are versatile and can be used on straight faucets, valves, and some unions. To use a pipe wrench, open the wrench's jaws to fit snugly around the fitting. Ensure the teeth of the wrench are digging into the metal to prevent slipping. Then, apply gentle, steady pressure to loosen the fitting.

an image of a copper pipe with the words never skip this in front of it
an image of a copper pipe with the words never skip this in front of it
How to remove a compression fitting: from a plumbing pipe
How to remove a compression fitting: from a plumbing pipe

Remember, you don't need excessive force. Over-tightening can damage the fitting and the wrench. It's often easier to break a fitting free with steady, gradual force than with sudden jerks.

Using a Basin Wrench

Basin wrenches are designed for tight spaces, with an adjustable head that allows you to access hard-to-reach fittings. To use a basin wrench, place the wrench's T-shaped end over the fitting and adjust the head until it's firmly gripping the fitting. Apply steady pressure to loosen the fitting.

AD

Be careful not to use excessive force, as this can strip the threads or damage the wrench. If the fitting is still too tight, you may need to use a specialized tool like a union wrench or, in some cases, a pickle fork to break the union.

Breaking a Seized Union

If the union fitting is seized, it may require a more specialized approach. One method is to use a pickle fork. This tool consists of two prongs that fit into the slots of the union fitting. Once the pickle fork is secure, you can use a hammer to gently tap the fork, applying steady, gradual force to break the union.

Another method is to use a propane torch to heat the union. The heat can cause the metal to expand and the seized threads to break free. Be careful when using a torch, ensuring it's well-ventilated and kept away from any flammable materials. Also, be aware that heating a fitting can weaken the metal, so this method should be used sparingly.

AD

Loosening a union fitting doesn't have to be daunting. With the right tools, a little lubricant, and some patience, you can tackle this task with confidence. Regular maintenance and lubrication can help prevent future seized fittings, saving you time and money in the long run.

AD