How to Load Staples in a Bostitch Staple Gun
Whether you're a professional paper pusher or a DIY enthusiast, knowing how to load a Bostitch staple gun is an essential skill to have. This powerful tool can rivet up to 30 sheets of paper with a single press, making it a lifesaver for tasks like binding notebooks, repairs, and craft projects. So, let's dive in and explore how to properly load your Bostitch staple gun, ensuring a smooth and safe operation.
Before we begin, it's crucial to understand that Bostitch staple guns come in various sizes, each compatible with specific staple types. For this guide, we'll focus on the popular 1/2 inch crown staples, used by the Bostitch T50 Heavy Duty or Bostitch 244oxR2 model. Always check your user manual to confirm the correct staple size for your tool.
Preparing Your Staples
Before loading your Bostitch staple gun, it's essential to understand the basics of your ammunition - the staple. Familiarize yourself with the different parts of a staple: the points, the crown, and the legs.
Staples are usually sold in strips, connected by a thin piece of metal. Before loading, you'll need to separate these strips into individual staples. Don't worry; we'll guide you through this process in the following subtopics.
Identifying Staple Strip Type
There are two types of staple strips: those connected by a straight runner and those by a coiled one. To determine which you have:
- Observe the shape of the staple strip. Straight runners connect staples in a perfectly straight line, while coiled runners connect them in a gentle curve.
- Examine the end of the strip. A straight runner will have a square-ended staple hanging off, while a coiled runner will have a rounded one.
Breaking Staple Strips
Depending on the type of staple strip, breaking them apart can be straightforward or require a tad more effort.
- Straight-runner strips: Simply bend the strip with your fingers until it snaps. You can also use a pair of pliers for easier breaking.
- Coiled-runner strips: These require a bit more force. You can use a pair of wire cutters or scissors to cut the runner, or carefully bend it to break without damaging the staple.
Loading Your Bostitch Staple Gun
Now that you've prepared your staples, it's time to load your Bostitch staple gun. Remember to keep safety in mind throughout the process, ensuring no one is near the tool while it's being loaded, and always wearing protective gloves.
Loading an Empty Magazine
Bostitch staple guns come with a removable magazine. Start by firmly pressing a staple strip into the seating area of the magazine. Make sure the points are facing downwards and the legs are nested within the magazine's channels.
With the staple strip secured, snap the magazine back into the staple gun. The top of the magazine should lock securely into place. If it's not loading, press down on the handle gently to test if the gun is firing properly. You should see the bottom staple push forward.
Checking the Jammed Staple
If your Bostitch staple gun suddenly won't fire, or there's a misfire, it's likely there's a jammed staple. To clear the jam:
- Unplug the tool if it's powered. Then, remove the magazine.
- Look for the jammed staple. It should be clearly visible in the feeding channel.
- Gently use needle-nose pliers to extract the staple, or carefully pull it out by hand if possible.
After clearing the jam, reassemble your staple gun and test it with a scrap piece of paper. You're now ready to tackle whatever binding or repair task comes your way.
In a nutshell, loading your Bostitch staple gun involves preparing your staples by identifying and breaking staple strips, and then securing them into the magazine. Always ensure your tool is free from jams and misfires for a safe and efficient experience. Now that you know the ropes, get stapling, and happy creating!