how to load scotch tape gun

"Mastering Scotch Tape Gun Loading: Step-By-Step Guide"

By Mark Jackson
AD

Unsure how to load Scotch tape gun? You're not alone. Many people have question marks hanging over their heads when it comes to loading this handy office tool. Don't worry; loading a Scotch tape gun is as simple as ABC. Let's get you rolling with these step-by-step instructions.

First, let's ensure you're starting with the right tool. A standard Scotch tape gun uses a 1.875-inch-wide tape. Most office supplies stores stock this size. Now that you've got the tape, let's begin.

Unloading the Scotch Tape Gun

Before you can load a new tape, you need to unload the old one. Don't worry; this won't result in a sticky situation. We promise.

AD
How to Load Your Packing Tape Gun | Duck Brand Duck Tape For Packing, Duck Tape Tumbler Cup, Heavy-duty Tape Dispenser Tool, How To Install Anti-slip Tape, In-line Extrusion Hot Melt Handguns, Moving Tips
How to Load Your Packing Tape Gun | Duck Brand Duck Tape For Packing, Duck Tape Tumbler Cup, Heavy-duty Tape Dispenser Tool, How To Install Anti-slip Tape, In-line Extrusion Hot Melt Handguns, Moving Tips
a pink hair dryer sitting on top of a table next to a woman's hand
a pink hair dryer sitting on top of a table next to a woman's hand
How To Load Scotch ATG Gun
How To Load Scotch ATG Gun

First, press the locking lever to release the old tape. The lever, usually red, is found alongside the trigger. Once unlocked, you can pull out the old tape and discard it.

Preparing the New Tape

Your new tape, meanwhile, needs a bit of preparation. Carefully peel off the protective layer from one end. This end will serve as the starting point for your new roll.

How To Refill Tape in Your Scotch ATG Gun - Changing Tape in The Advanced Tape Glider
How To Refill Tape in Your Scotch ATG Gun - Changing Tape in The Advanced Tape Glider
How to load your ATG 714 - Paper Renee Episode 11
How to load your ATG 714 - Paper Renee Episode 11

Next, tear off a small section from the other end. This part will serve as the finishing point, helping the tape to end neatly at the end of your roll. Now, you're ready to load the tape into the gun.

Loading the New Tape

Hold the gun in one hand, with the tape entrance facing upwards. Using your other hand, feed the prepared starting end of the tape into the entrance, following the tape path until it reaches the feeding rollers.

AD

Once the tape reaches the rollers, wind it around a few times. This helps the tape feed smoothly when you need it. Now, slowly pull out the tape from the other end until it reaches the cutting edge. You're almost done!

Securing the Tape

The final step is crucial for preventing jams and ensuring smooth tape dispensing. Once you've pulled the tape to the cutting edge, secure it with the locking lever.

Push the lever back into place. This locks the tape in, ready for action. Now, you're all set. Go ahead, press that trigger and dispense some tape!

AD

Removing the Protective Cork

One last thing; some Scotch tape guns come with a protective cork in the dispensing hole. Remove this before using. It's a simple task - just pull it out gently.

And there you have it! You're now a Scotch tape gun pro. With these steps, you'll be whipping through packaging tasks, craft projects, and more. Happy taping!

AD