how to load film into camera

Mastering the Art: How to Load Film into Your Camera

By Thomas Williams
AD

Loading film into a camera might seem intimidating at first, but with the right guidance, it's a straightforward process. For those transitioning from digital to film photography, or picking up an older camera, this guide will walk you through the steps to load film like a pro.

Before you begin, ensure you're in a light-tight environment. The camera and film cartridge must be shielded from light from the moment you open the camera back until the film is completely loaded. A simple film changing bag or even a dark room will suffice.

Understanding Your Film and Camera

First, let's familiarize ourselves with the types of film cartridges. They primarily come in two varieties: 35mm and 120 (or medium format). Most 35mm cameras like the Canon EOS or Nikon FM use a cartridge that winds the film onto a spool. Medium format cameras like the Mamiya 645 or Rolleiflex use a different type of cartridge that requires you to manually wind the film onto a take-up spool.

AD
How to Load Film into a 35mm Camera
How to Load Film into a 35mm Camera
How to Load Your Film Camera 🙌🏼 New Cameras Just Dropped!
How to Load Your Film Camera 🙌🏼 New Cameras Just Dropped!
How to load your film camera
How to load your film camera

Similarly, cameras can have different film advance mechanisms. Some cameras advance film manually, while others do so automatically. Understanding your camera's film path and advance mechanism is crucial for a smooth loading process.

Preparing Your Film

Before loading, check the end of the film leader (the tongue-like part that sticks out) to ensure it's perforated. This allows the film to advance correctly. If not, you may need to cut a small notch into it using a sharp blade. Be careful not to cut too deeply to avoid damaging the film.

How To Load Film: A Step by Step Guide For Most Cameras
How To Load Film: A Step by Step Guide For Most Cameras
a person holding a camera in their hand
a person holding a camera in their hand

Also, check the DX code on the side of the film cartridge. This code helps your camera meter correctly. If your camera doesn't have a DX code reader, you'll need to manually set the ISO on your camera.

Opening the Camera Back

Open the camera back carefully. Many cameras have a small lever or button that needs to be pressed first. Some high-end cameras may require a special tool. Some cameras, like the Leica M series, don't have a traditional back and require the entire bottom plate to be removed.

AD

Once the back is opened, you'll see the film take-up spool (the empty spool) and the film compartment where the new cartridge goes. Some cameras have a spring-loaded door that pops out to help guide the film onto the spool.

Loading the Film

Now, it's time to load the film. Start by placing the film cartridge into the camera. The cartridge should fit snugly into its slot. Some cartridges may need to be twisted or pressed to fit.

Next, remove the film leader from the cartridge. Some cartridges have a small tab to help you pull the film out. Be gentle to avoid tearing the film.

AD

Attaching the Film Leader

Find the take-up spool in your camera. The film leader needs to be attached to this spool. Some cameras have a small notch or arrow on the spool to help guide the film leader onto it. Thread the film leader onto the spool, ensuring it's securely attached. You may need to wind the film a bit to secure it.

In some medium format cameras, you'll need to manually wind the film onto the take-up spool. Ensure you're not winding it too tightly to avoid damaging the film.

Closing the Camera Back

Once the film is securely attached to the take-up spool, close the camera back. Most cameras require you to pull the back in first, then slip it into place, and finally, lock it. Check that the back is secure to prevent light leaks.

AD

Finally, wind the film until the leader is completely off the take-up spool and into the DX code reader (if your camera has one). You should hear a click when the film is fully advanced. Be careful not to wind too far to avoid tearing the film.

Congratulations! You've successfully loaded film into your camera. Remember to treat your film with care and keep exposed film in a dark bag until it's time to develop. Happy shooting, and may your negatives be well-exposed and your prints stunning!

AD