how to load film canon ae-1

Master Canon AE-1 Film Loading: Step-by-Step Guide

By Hannah Martinez
AD

Loading film on the Canon AE-1, a timeless classic in the world of 35mm SLR cameras, is a rewarding process that opens a world of creative possibilities. This hands-on guide will walk you through the steps, ensuring you're ready to capture stunning images on your instantly recognisable, retro gear.

First, let's gather the necessary equipment: a roll of 35mm film, your Canon AE-1, and a film canister. Also, consider having a light-proof changing bag or changing film in a darkroom or during night hours to prevent light from exposing your film.

Preparing Your Camera and Film

The first step is to ensure your camera is film-ready and your film is properly handled.

AD
How to load 35mm film ø Canon AE-1
How to load 35mm film ø Canon AE-1
a woman sitting at a table with a camera in her hand and the caption reads, how to read film in canon af - 1
a woman sitting at a table with a camera in her hand and the caption reads, how to read film in canon af - 1
photo camera
photo camera

Before you begin, make sure your Canon AE-1's back is open and the lens cap is on to prevent dust from entering the camera. Also, check that the film advance lever and rewind knob are pointing in the correct direction.

Loading the Film Leader

The film leader, theempiover does.|The film leader is the licked edge of the film that helps it advance correctly in the camera. Using your fingers, gently pull out the film leader from the canister until you see a white notation, typically a Mark or 'ole' near the film's edge.

a woman holding a camera in front of her face
a woman holding a camera in front of her face
Fstoppers Analog Reviews: Canon AE-1 Program | Fstoppers
Fstoppers Analog Reviews: Canon AE-1 Program | Fstoppers

Insert the film leader into the take-up spool of the Canon AE-1. You'll find a slot in the bottom of the spool, specifically designed for this purpose. The white notation should be opposite the 'A' on the sprocket.

Winding the Film

Next, close the camera back, being careful not to let any light leak inside. Turn the camera on, and wind the film until you hear a 'click' after the first full rotation of the advance lever. This click signifies that the film leader is secured, and the film is ready for exposure.

AD

The frame counter should now register '1.' This means your camera is ready to capture your first shot. To check if everything is working as expected, wind the film two more times. The frame counter should move to '3.' If it does, you're all set!

Exposing and Re-winding the Film

Now that your camera is ready, go ahead and take some stunning shots. Remember to wind the film after each exposure.

When you've finished shooting and it's time to rewind the film, switch the camera off and set the lens to 'A.' To rewind the film, turn the rewind knob slowly and steadily in the 'R' direction until the film is fully wound back into the canister. The camera will make several 'clicks' as it rewinds, and the rewind knob should stop once the film is completely rewound.

AD

Removing the Film

Once the film is rewound, open the camera back and remove the film canister. You'll notice that the film is not fully unreels from the take-up spool; this is normal. Gently pull the remaining film back into the canister, making sure not to kink or scrunch it. Then, close and secure the film canister.

Congratulations! You've successfully loaded and unloaded a roll of film from your Canon AE-1. Now, all that's left is to send your film for developing and eagerly await those beautifully printed images, knowing you've preserved the analog magic.

AD