how to load a bobbin in a kenmore sewing machine

Mastering Kenmore: Step-by-Step Bobbin Loading Guide

By Brian Anderson
AD

Are you eager to kickstart your sewing project on your trusty Kenmore sewing machine but unsure about how to load a bobbin? You're not alone! Loading a bobbin might seem like a daunting task at first, but with our step-by-step guide, you'll be winding and threading like a pro in no time.

Before we dive into the process, let's ensure you have your Kenmore sewing machine set up with the correct bobbin case. The technique we'll describe applies to most Kenmore models, but if you're unsure, always consult your machine's manual.

Preparing Your Bobbin

Preparation is key to a smooth sewing experience. Begin by ensuring your bobbin is full, and the thread tail is pointing in the correct direction. A incorrectly wound bobbin can cause tangles, tension issues, and wasted thread.

AD
how to insert a bobbin in a sewing machine top loading and front loading instructions
how to insert a bobbin in a sewing machine top loading and front loading instructions
Aunt Jane showing how to load a bobbin on a Kenmore Sewing Machine
Aunt Jane showing how to load a bobbin on a Kenmore Sewing Machine
How to Put a Bobbin in Any Sewing Machine – 4 Ways
How to Put a Bobbin in Any Sewing Machine – 4 Ways

Kenmore bobbins typically come in two types: top-loading and front-loading. We'll focus on the more common top-loading bobbin in this guide, but you can find separate instructions for front-loading bobbins online.

Threading the Bobbin

Start by cutting a length of thread, around 18-24 inches, from your thread spool. This thread will be used to wind your bobbin.

How To Correctly Load A Bobbin In A Sewing Machine
How To Correctly Load A Bobbin In A Sewing Machine
How to load a bobbin in a Kenmore sewing machine
How to load a bobbin in a Kenmore sewing machine

Holding the thread tail with your fingers, bring the thread under the bobbin and up through the slot on the side. Now, secure the thread tail by lightly pinching it between your thumb and the bobbin's side. With the other hand, begin winding the thread onto the bobbin, keeping it taut and even.

Winding the Bobbin

With the thread secured and the bobbin in your dominant hand, use your other hand to turn the handwheel on your Kenmore sewing machine clockwise. This action should wind the thread onto the bobbin neatly and evenly.

AD

Continue winding until you've almost reached the top of the bobbin. If you're using a clear bobbin case, you should be able to see when you've reached the right point. Leave a little room at the top for the thread tail and gently stop turning the handwheel.

Installing the Bobbin in Your Kenmore Sewing Machine

Now that your bobbin is wound and ready, it's time to install it in your Kenmore sewing machine. First, make sure the sewing machine is unplugged to ensure safety. Then, locate the bobbin case under your machine's throat plate. This case should pop out with a gentle press.

With the bobbin case removed, you should see the bobbin attachment screw. Insert your bobbin into the case, ensuring the thread tail is pointing towards the outside of the case. The thread will be on top if your bobbin is designed for top-loading.

AD

Securing the Bobbin

Once the bobbin is in place, firmly press it down into the case. You should hear a satisfying click as it locks in. Then, carefully align the bobbin case with the bobbin attachment screw on your sewing machine and reattach it. Ensure the case clicks securely into place.

Next, gently remove the thread tail from the top of the bobbin and place it on the take-up lever, located just behind the throat plate. You should see a small hook or groove on the lever where you can secure the thread tail.

Threading the Top of Your Kenmore Sewing Machine

Now, it's time to thread the top of your sewing machine. Start by pulling your thread from the spool, over the thread guide and tension discs, then under the take-up lever. Pull the thread to the left, towards the needle plate, and bring it down through the slot.

AD

Insert the thread into the eye of the needle from the back, ensuring it comes out the front cleanly. You can now remove any excess thread from the spool and begin sewing.

Congratulations! You've successfully loaded a bobbin in your Kenmore sewing machine. With practice, this process will become second nature, and you'll be ready to tackle any sewing project that comes your way. Happy sewing!

AD