Level Maytag Washer: Step-by-Step Guide
If your Maytag washer is tipping or wobbling during its spin cycle, it might need leveling. A level washer is essential for efficient cleaning and prolonging the lifespan of your appliance. Here's a step-by-step guide on how to level your Maytag washer, ensuring a safe and optimal performance.
Before you start, make sure to unplug your washer from the power source and clear the area around it to provide ample working space. Also, gather the necessary tools: a level, a socket wrench, and some shims if needed.
Assessing the Current Leveling of Your Washer
Begin by checking if your washer is currently level. Place a level on top of the washer, making sure it's parallel with the front edge. If the bubble in the level isn't centered, your washer needs leveling.
Also, check the bottom of the washer for built-in leveling feet. These feet might be adjustable, which would facilitate the leveling process. Some Maytag washers may not have these feet, so you'll need to proceed with the next steps to level your washer.
Leveling the Front Feet
Most Maytag washers have adjustable feet at the front. These feet can be adjusted using a socket wrench. Start by placing the washer in its intended permanent location. Then, use the level to check if the front of the washer is level.
If not, adjust the front feet by turning the nut clockwise to raise the foot or counterclockwise to lower it. Do this on both sides until you achieve a level front. Once you're satisfied with the level, secure the feet by tightening the lock nuts.
Leveling the Rear Feet
If your washer doesn't have adjustable feet at the rear or you're using shims, follow these steps. First, check the level of the rear of the washer. If it's not level, place a shim under the low side. Use a level to check the new height and add shims as necessary until the washer is level.
If your washer has adjustable feet at the rear, use a socket wrench to turn the nut clockwise to raise the foot or counterclockwise to lower it. Level the rear feet the same way as the front feet, ensuring the washer is level both front to back and side to side.
Testing and Final Adjustments
Once you've leveled your washer, plug it back in and test it. Run a spin cycle to make sure the washer isn't wobbling or tipping. If it is, you may need to make further adjustments.
After you've confirmed the washer is level and functioning properly, double-check all nuts and bolts are tight and secure. This ensures your washer will remain level and safe for use over time. Regular maintenance checks can also help prevent any future leveling issues.
Congratulations! You've successfully leveled your Maytag washer. Now, enjoy peace of mind knowing your appliance is working efficiently and safely. If you continue to experience issues, don't hesitate to contact a professional for further assistance.