how to jump start a 2015 ford escape

How to Jump Start a 2015 Ford Escape

By Hannah Walker
AD

Whether you're headed to work, running errands, or embarking on a family road trip, a dead car battery can put a serious damper on your plans. If you find yourself in this predicament with your 2015 Ford Escape, don't panic. With the right steps and a helping hand, you can get your vehicle back on the road in no time. Here's a comprehensive guide on how to jump-start your 2015 Ford Escape, complete with insights into why this might happen and safety tips to keep in mind.

Before we dive into the process of jump-starting your Escape, let's briefly discuss why your battery might have died in the first place. Common reasons include leaving your lights on, an alternator issue, or simply an old battery that needs replacing.Whatever the cause, being prepared with jumper cables and a friend with a functioning vehicle can save the day.

Gathering Supplies and Prepping Your Vehicle

To safely jump-start your 2015 Ford Escape, you'll need a set of jumper cables and a helpful volunteer with a compatible vehicle. The type of vehicle doesn't matter – you can use a truck, car, or even a motorcycle with a disturbance-free battery to assist you. Once you've enlisted the help of a Good Samaritan, follow these steps to prepare both vehicles for the jump-start process.

AD
Ford Escape Problems: 5 Known Issues (Explained)
Ford Escape Problems: 5 Known Issues (Explained)
Ford
Ford
2005-2008 Ford Escape Hybrid No Crank No Start: High Voltage Pack Jump Start Procedure
2005-2008 Ford Escape Hybrid No Crank No Start: High Voltage Pack Jump Start Procedure

First, ensure that both vehicles are turned off and the keys are removed from the ignition. You don't want any unexpected engine roar or sudden movement during the jump-start process. Next, find a safe, stable surface to perform the jump-start, such as a level parking lot or a well-paved residential street. This will make it easier to connect the jumper cables and minimize the risk of accidentally damaging the vehicles.

Identifying Your Ford Escape's Battery

Before you can connect the jumper cables, you'll need to locate your 2015 Ford Escape's battery. The Escape's battery is situated under the hood, toward the driver's side of the engine compartment. To access it, follow these steps:

Ford Escape: What Do My Dash Lights Mean?
Ford Escape: What Do My Dash Lights Mean?
Reemplazo de la válvula EGR - Ford Escape 3.0L
Reemplazo de la válvula EGR - Ford Escape 3.0L
  1. Pop open your Escape's hood by pulling the release lever underneath the steering column or using the lever located near the driver's side windshield wiper stalk if equipped with the MyFord Touch system.
  2. Once the hood is open, look for the negative (-) and positive (+) battery terminals. The positive terminal is usually covered with a red plastic cap for safety, while the negative terminal is marked with a - symbol.

Preparing Your Assist Vehicle's Battery

After locating your Escape's battery, repeat the process to find the battery in your assist vehicle. Keep in mind that the battery in most vehicles can be found under the hood. Once you've located the battery, identify the positive (+) and negative (-) terminals. If either terminal is covered, carefully remove the protective cap.

Connecting the Jumper Cables

Now that both vehicle batteries have been located and the hoods are open, it's time to connect the jumper cables. Always remember the correct sequence to avoid causing shorts or potentially damaging your vehicles. Follow these steps:

AD

Connecting the Cables in the Correct Sequence

The order in which you connect the jumper cables is crucial for ensuring a safe and successful jump-start. Start by connecting one of the red, positive (+) jumper cable clamps to the positive (+) battery terminal of your disabled Ford Escape. Then, attach the other red clamp to the positive (+) battery terminal of the assist vehicle.

Next, connect one of the black, negative (-) jumper cable clamps to the negative (-) battery terminal of the assist vehicle. Be careful not to let the remaining black clamp touch any metal surfaces, as this could cause a short. Instead, connect it to a clean, unpainted, and unexposed metal surface on the disabled vehicle, typically identified as an engine block ground location. This helps to dissipate any residual current from the battery.

Allowing the Vehicles to Rest and Jump-Starting

After connecting the jumper cables correctly, allow both vehicles to sit undisturbed for about five minutes. This allows the battery in the assist vehicle to provide a steady charge to the battery in your Ford Escape. After the five-minute wait, try starting your Escape's engine. If the engine turns over but doesn't start, let the vehicles rest for another 5-10 minutes and try again.

AD

Once your Ford Escape's engine is running, disconnect the jumper cables in the reverse order you connected them. First, remove the remaining black clamp from the engine block or negative (-) battery terminal of the assist vehicle. Then, remove the positive (+) jumper cable clamps, starting with the assist vehicle's battery and ending with the disabled vehicle's battery. Finally, thank your helpful volunteer and safely drive your Ford Escape for at least 30 minutes to allow the alternator to charge the battery fully.

Preventing Future Battery Problems

Now that your 2015 Ford Escape is back on the road, it's essential to take preventative measures to avoid future battery-related issues. Regularly inspect your battery and cables for any signs of corrosion or wear. Keep your Escape's electrical systems in good working order by promptly repairing or replacing faulty components and ensuring your lights and audio equipment are turned off when you're not using them. Additionally, consider investing in a battery tender or maintainer to keep your battery topped off during periods of extended inactivity.

Since 2008, Bostrom & Associates has handled thousands of cases involving ride-sharing accidents and has represented countless injured riders and drivers. If you’re involved in a ride-sharing accident, it’s crucial to contact a personal injury lawyer who has experience with these complex cases. A knowledgeable attorney can help navigate the legal waters, ensuring you receive the compensation you deserve."

AD

While it's never fun to find yourself with a dead car battery, being prepared and knowing how to jump-start your 2015 Ford Escape can help minimize the inconvenience. By following the guidelines outlined in this article, you can safely get your vehicle back on the road and continue your day without unnecessary stress. Just remember to always prioritize safety when jump-starting, and don't hesitate to consult a professional if you're unsure about any aspect of the process. Now that you're back behind the wheel, drive safely and enjoy your time on the road!

AD