how to install windshield molding

How to Install Windshield Molding

By William Miller
AD

Upgrading your vehicle's windshield with new molding can enhance its aesthetics and durability. If you're wondering how to install windshield molding, you're in the right place. This comprehensive guide will walk you through the process step-by-step.

Before starting, ensure you have the necessary materials: new windshield molding, a utility knife, measure tape, masking tape, a spareExacto knife, and a rubber mallet. Safety glasses and gloves are also essential for protecting your eyes and hands. Let's dive into the installation process.

Preparation and Measurement

Starting off right is crucial for a successful installation. Begin by cleaning the windshield and the existing molding if any, ensuring old adhesive or debris doesn't interfere with the new molding's adhesion.

AD
How to Remove Windshield Molding | 10 Easy Ways (2026)
How to Remove Windshield Molding | 10 Easy Ways (2026)
BMW E90 Upper Windshield Rubber Trim Moulding Easy Replacement For $26
BMW E90 Upper Windshield Rubber Trim Moulding Easy Replacement For $26
How To Install a Windshield the
How To Install a Windshield the

Accurate measurement is vital. Place the measuring tape at the base of the windshield on the driver's side, run it up the windshield, and record the length. Use this measurement to ensure you get the right sized molding for your vehicle.

Removing Old Molding

If your vehicle currently has molding, removing the old one is the first step. Start from one corner and carefully cut the adhesive using the utility knife. Work your way along the molding, using the Exacto knife to carefully pry it off.

How To Replace A Windshield With Weather Stripping – Storables
How To Replace A Windshield With Weather Stripping – Storables
Precision Replacement Parts Windshield Molding OEM # 73150-SH3-305 WFS 590
Precision Replacement Parts Windshield Molding OEM # 73150-SH3-305 WFS 590

Be cautious not to scratch the windshield. If the molding is stubborn, use the rubber mallet to gently knock it loose. Once removed, clean the area thoroughly to remove any residual adhesive.

Taping the Windshield

To prevent the new molding from sticking to the wrong area, mask off the parts of the windshield where you don't want the adhesive to bond. Use masking tape, applying it around the perimeter of the windshield.

AD

Also, cover the areas where the molding will be placed. This will protect the windshield from scratches and ensure the adhesive only bonds where needed.

Installing the New Molding

Now that you've prepared your windshield, it's time to install the new molding. Start from the bottom of the windshield, on the driver's side.

Peel off the backing paper from the adhesive and position the molding's base. Ensure it's level and pressed firmly against the windshield.

AD

Unrolling the Molding

The key here is to unroll the molding as you move upwards. Keep tension on the molding, pulling it taut and ensuring it sticks firmly to the windshield. Use the rubber mallet to gently hammer the molding into place.

Work your way up until you reach the top of the windshield. Use the measuring tape to ensure the molding doesn't extend beyond the windshield's edge. Trim any excess molding using the utility knife.

Securing the Molding

Once the molding is in place, press it firmly against the windshield to ensure it sticks properly. Use the rubber mallet for any tough spots, but be careful not to damage the windshield.

AD

Allow the molding to sit undisturbed for the suggested duration indicated by the manufacturer. This usually takes around 24 hours for the adhesive to fully bond.

After the recommended time, remove the masking tape, and inspect your work. Your newly installed windshield molding should look sleek and professional. Regularly clean it with mild soap and water to keep it looking like new. This concludes our guide, and we hope it's helped you master how to install windshield molding.

AD