how to install underglow on a car

Step-by-Step Guide: How to Install Underglow on a Car

By John Jones
AD

Installing underglow lights on your car can enhance its appearance, making it stand out on the road. This article will guide you through the process, from choosing the right lights to the installation process. As with any car modification, ensure you follow safety guidelines and local regulations.

Underglow lights, also known as ground effects or halo lights, are LED strips that are attached to the underside of your car, typically along the wheel wells, doors, and bumpers. They can provide a striking, modern look to your vehicle, but they should be installed carefully to avoid any safety or legal issues.

Choosing the Right Underglow Lights

Before you start, you need to decide on the type of lights, their color, and the length you'll need. RGB lights can change color, while single-color lights offer a more subtle, uniform glow.

AD
Underglow LED lighting on every vehicle
Underglow LED lighting on every vehicle
a purple car with its hood up in the dark
a purple car with its hood up in the dark
How to Light Car Underglow | 8 Easy Steps (2026)
How to Light Car Underglow | 8 Easy Steps (2026)

Measure your car's length and areas where you want to install the lights. Most underglow kits come in standard lengths, but you may need to trim them to fit. Always check the kit's IP rating to ensure they're waterproof and suitable for your car's underside.

Type of Lights

There are two main types of underglow lights: single-color and RGB. Single-color lights typically last longer and use less power, while RGB lights offer a wide range of color options. Consider the effect you want to achieve and your budget when choosing between the two.

Underglow Kit Install [ Subaru Legacy GT - Under Car Bluetooth LED ]
Underglow Kit Install [ Subaru Legacy GT - Under Car Bluetooth LED ]
Under Car LED Underbody Light Kit Installation Guide
Under Car LED Underbody Light Kit Installation Guide

For a consistent, subtle look, single-color lights may be the best choice. RGB lights, on the other hand, can create a dramatic effect, especially with apps or controllers that allow you to change colors based on music rhythm or other Factors.

Length and Color

Measure the areas where you want to install the lights, including under the bumper, around the wheel wells, and along the sides. Most underglow kits come in standard lengths, but you may need to trim them to fit. Always check the kit's IP rating to ensure they're waterproof and suitable for your car's underside.

AD

Colors range from subtle and classy (like white or blue) to bold and vibrant (like red or green). Consider the color scheme of your car and the overall aesthetic you want to achieve. Some people prefer their underglow lights to match their daytime running lights or headlights, while others choose colors that complement their paint job or interior lighting.

The Installation Process

Once you've chosen your lights, it's time to install them. This process usually involves drilling a few small holes, threading the LED strips through, and securing them with laser-printed adhesive tape or Velcro.

The provided instructions will vary depending on the make and model of your car and the specific underglow kit you've purchased. Always follow the kit's instructions carefully to ensure a safe and successful installation.

AD

Preparation

Before you start, ensure you have all the necessary tools, including a drill, screwdriver (if using screws), wire cutters,tape measure, and potentially a heat gun for trimming the LED strips.

Next, thoroughly clean the areas where you'll be installing the lights. This helps the adhesive tape stick properly and ensures the best possible contact between the lights and your car's underside, for optimal glow.

Installing the Lights

Starting with one side of the car, measure and cut your LED strips to the required length. Use a heat gun to carefully trim the strips, heating them first to prevent damage to the LEDs or their waterproofing.

AD

Following the kit's instructions, drill small holes in the underside of your car, typically at the edges of the panels (like along the door sills or under the bumper). Thread the LED strips through these holes, ensuring they lay flat against the underside of the vehicle.

Use the provided adhesive tape or Velcro to secure the LED strips in place. Ensure they're flat against the underside and evenly spaced. If using screws, secure them with the provided hardware, ensuring they're tight but not too tight, to avoid cracking the underside of your car.

Testing and Finishing Up

Before replacing any panels or closing the hood or trunk, test your underglow lights to ensure they're working correctly. If everything's in order, close up your car and turn on your lights to admire your handiwork.

Remember, it's essential to follow safety guidelines and local regulations regarding underglow lights. In many places, they're only allowed on the underside of the car, not on the sides, and may not be permitted at all during certain times of day. Always check your local traffic laws before installing any aftermarket lights.

Enjoy your new underglow lights! Remember, they're not just a way to personalize your car, but also an opportunity to show off your creativity and engineering skills. If you're unsure about any aspect of the installation process, don't hesitate to consult a professional. Happy driving!

AD