how to install stone edgers

Step-by-Step: How to Install Stone Edgers Perfectly

By Rachel White
AD

Installing stone edgers can transform the appearance of your landscape, adding a clean, defined look to your flower beds and garden paths. But with the right tools and techniques, this DIY project isn't as daunting as it might seem. Let's dive into the step-by-step process of installing stone edgers like a pro.

Before we get started, it's important to note that this guide assumes you already have a clear understanding of your edging layout and have chosen your stones or pavers. This guide focuses on the physical installation process.

Preparation and Planning

Before you begin, gather all necessary tools and materials. This typically includes your chosen stones or pavers, a shovel, a square-nosed shovel, a level, a tape measure, construction adhesive, Concrete Sak_replace_with_latex{94}\TEXTsymbol94 or similar, a rubber mallet, and safety gear like gloves and goggles.

AD
How To Install Cobblestone Edging
How To Install Cobblestone Edging
a man is using a shovel to clean the grass in front of his house,
a man is using a shovel to clean the grass in front of his house,
How to Level Edging Stones--Front Yard Refresh
How to Level Edging Stones--Front Yard Refresh

Measure and map out your edging path. This will help you decide on any turns or curves and ensure you have enough materials. Also, determine the depth you want your edgers to sit. A common depth is around 2-3 inches, but this can vary based on your preference and the height of your chosen stones.

Clearing the Path

Mark out your edging path using stakes and string. Then, use a square-nosed shovel to dig out a trench along your marked line. The trench should be about 1-2 inches wider than your stones and as deep as you've decided.

a man digging in the ground with a shovel and grass behind him, text reads get instant curb appeal with tips diy landscaping hack
a man digging in the ground with a shovel and grass behind him, text reads get instant curb appeal with tips diy landscaping hack
a stone bench with flowers growing out of it
a stone bench with flowers growing out of it

Once the trench is dug, use a level to ensure the base is even. This is crucial for a straight, even edging line. Ensure there's a slight slope away from structures to facilitate water drainage.

Installing the Base

Before laying your stones, prepare the trench base to ensure a stable foundation. Add a layer of Concrete Sak_replace_with_latex{94}\TEXTsymbol94 or similar, ensuring it's uniformly spread and compacted. This provides a solid base and helps prevent weed growth.

AD

If you're using larger stones, you might want to bed them in sand to improve stability and promote drainage. Pour a layer of sand into the trench, level it, and compact it before laying your stones.

Laying the Stone Edgers

Now that your base is prepared, it's time to lay your stone edgers. Start at a straight, easy-to-access point, like a corner or a straighter section of your path.

Apply construction adhesive to the underside of your first stone. Align it with your string line and the base of your trench. Use a rubber mallet to gently tap it into place, ensuring it's level and perpendicular to the ground.

AD

Laying a Straight Line

Continue laying stones along the trench, using the string line as a guide. Ensure each stone is level, perpendicular, and tightly butted against the previous one. Use your tape measure to check the distance between stones is consistent.

For larger, more consistent stone runs, you might want to lay a few stones, then use a straight edge like a 2x4 or a level to keep them in a straight line as you continue.

Dealing with Corners and Curves

Laying stones around corners or curves can be a bit trickier. For precise curves, consider renting or purchasing a curve-cutting tool or ask your stone supplier about precut edgers.

AD

For 90-degree corners, lay the first corner stone, then place the next stone at a 45-degree angle against the first. This should create a 90-degree corner. Adjust as needed to keep your line straight and level.

Finishing Up

Once all your stones are laid, recheck your work for level and alignment. Use your rubber mallet to tap any stones that need minor adjustments. Then, fill the gap between the stones and the ground with your chosen backfill (sand, topsoil, or gravel).

Water your backfill to help it settle and promote colonization by weed-preventing plants. Then, use a piece of cardboard or a straight edge to remove any excess backfill from the tops of your stones.

Congratulations, your stone edging is now complete! With a bit of maintenance to keep weeds at bay and replace any damaged stones, your edging will provide a polished look to your landscape for years to come. Happy gardening!

AD