how to install schlage deadbolt

**Step-by-Step Guide: How to Install Schlage Deadbolt**

By Amanda Miller
AD

Transform your home's security and aesthetics with a Schlage deadbolt. Known for their reliability and contemporary design, Schlage deadbolts are a practical choice for your door. Here's a comprehensive guide on how to install one, ensuring your new deadbolt not only adds flair but also fortifies your home.

Before you begin, gather your tools: a screwdriver (usually provided with the deadbolt), a Philipps-head screwdriver, and, if not included, a drill bit that matches the size of your existing lock's screw holes. Also, ensure you have the correct Schlage deadbolt model that matches your door's prep - standard bored or mortise - for a seamless fit.

Preparing Your Door for Installation

Before removing your old lock, measure your door from the edge to the center of the existing lock hole to ensure the new Schlage deadbolt fits correctly. Standard doors are typically 2 ⅜" thick. Also, double-check if you need to convert your door from a right-hand swing to a left-hand swing or vice versa during this process.

AD
How to Install a Schlage Keypad Deadbolt - HandyManHowTo
How to Install a Schlage Keypad Deadbolt - HandyManHowTo
Install a Schlage Encode WiFi Deadbolt Like a Pro
Install a Schlage Encode WiFi Deadbolt Like a Pro
How To Program Your Schlage BE365 Keypad Deadbolt
How To Program Your Schlage BE365 Keypad Deadbolt

Next, remove the existing lock. Use a Philipps-head screwdriver to remove the screws securing the faceplate, and gently pull out the old lock. Be careful not to damage the hole or remove too much wood around it. If the old lock won't budge, consider using a drill to remove the screws.

Installing the Schlage Deadbolt Cylinder

The deadbolt's cylinder is its core component, containing the locking mechanism. Start by inserting the cylinder into the exterior side of your door, ensuring the Clark (or eccentric) ring is aligned with the edge of the door. The cylinder's tailpiece should poke through the hole on the interior side.

How to Install a Deadbolt Lock
How to Install a Deadbolt Lock
How to Install a Deadbolt Lock
How to Install a Deadbolt Lock

Use the provided screws to attach the cylinder to the door. If the cylinder doesn't seem to fit, double-check that the set screw in the clark ring is fully tightened and the correct alignment. Additionally, ensure the faceplate is secured tightly on the interior side to keep the lock's tailpiece in place.

Attaching the Latch and Deadbolt Mechanism

With the cylinder in place, position the latch and deadbolt mechanism on the interior side. The latch should fit flush against the door, with the tailpiece aligned with the latch's opening. Secure it using the provided screws.

AD

Next, insert the deadbolt button through the faceplate and lock it into place. Ensure the deadbolt turns smoothly by trying the lock from the exterior and interior. If the deadbolt doesn't function correctly,check that the set screw on the tailpiece is secure and the mechanism is aligned properly.

Finishing Up and Testing the Schlage Deadbolt

Once the lock functions correctly, secure the faceplate by screwing it onto the lock from the interior side. Make sure it's level and doesn't interfere with the deadbolt's movement. If your Schlage deadbolt has a handle, attach it now, using the provided screws.

Finally, test your new Schlage deadbolt thoroughly. Lock and unlock it several times from both sides to ensure it works smoothly and securely. Your new deadbolt should provide peace of mind and enhance your door's appearance, ready to face all the challenges of daily use.

AD

Keep your lock's keys safe, and always remember to engage the deadbolt whenever you leave your home. Enjoy the added security and aesthetics, and happy locking!

AD