how to install samsung washer pedestal

How to Install Samsung Washer Pedestal

By Ashley Young
AD

Installing a Samsung washer pedestal might seem daunting, but with the right steps and a little know-how, you can elevate your laundry room's aesthetic and functionality in no time. Here's a comprehensive guide to help you through the process.

Before you begin, gather all the necessary tools and components. You'll need a Samsung washer pedestal, a screwdriver, a ratchet wrench, an adjustable wrench, an Allen wrench, and potentially some pliers. Also, ensure you have the installation manual specific to your Samsung washer and pedestal model, as variations may apply.

Preparation and Location

Choosing the right location for your Samsung washer and pedestal is crucial. Ideally, you want a level surface, proximity to water and drainage points, and ample space for the appliance. Once you've found the perfect spot, prepare the area by clearing debris and ensuring it's clean.

AD
a person standing next to a washer and dryer on a wooden floor in front of two people
a person standing next to a washer and dryer on a wooden floor in front of two people
How to install the pedestal for your Samsung washing machine and dryer | Samsung US
How to install the pedestal for your Samsung washing machine and dryer | Samsung US
7 Washer & Dryer Pedestal Alternatives You Probably Already Have
7 Washer & Dryer Pedestal Alternatives You Probably Already Have

Measure and double-check that your chosen site allows for the installation of both the washer and the pedestal. Samsung's standard washer dimensions with the pedestal installed are approximately 35.5" (H) x 27" (W) x 25" (D), so ensure you have enough space.

Turn Off Water and Electricity

Before you start any installation, safety comes first. Turn off the water supply valves connected to your current washer. If you're unsure about the valves' location or operation, consult a professional plumber.

Samsung Front Load Laundry Pedestal Installation
Samsung Front Load Laundry Pedestal Installation
$30 DIY Laundry Pedestal
$30 DIY Laundry Pedestal

Next, disconnect the electrical power to your washer by unplugging it from the outlet or flipping the circuit breaker to the 'off' position. Always prioritize safety when working with electrical components.

Remove the Old Pedestal (if any)

If you're replacing an existing pedestal, start by disconnecting the old one from the washer and the hot and cold water supply hoses. Use a screwdriver or ratchet wrench to remove any securing screws or bolts.

AD

Lift the old pedestal up and out of its position, and carefully move it away from the work area to prevent any interference during the new installation.

Installing the Samsung Washer Pedestal

Begin by positioning the new Samsung washer pedestal under the washer, ensuring it's centered and level. You may need to adjust the casters or feet of the pedestal to achieve levelness. The washer should rest stably and evenly on top of the pedestal.

Now, it's time to secure the washer to the pedestal using the provided mounting hardware. Follow the instructions in your specific Samsung model's manual for the correct mounting sequence and techniques.

AD

Connecting the Water Supply Hoses

Before connecting the water supply hoses from the pedestal to the washer, ensure that the connectors are properly matched to their corresponding inlets on the appliance. Typically, the hot and cold water hoses will be color-coded to match the inlet ports.

Thread one end of each hose onto the washer's water inlet ports, which are usually found at the bottom back of the appliance. Secure the hose connections using your hands at first, and then tighten them further using adjustable pliers to ensure a proper and leak-free seal.

Securing the Hoses and Final Checks

To prevent kinking or damage to the water supply hoses, route them carefully along the back of the pedestal and secure them gently with cable ties or clamps. Ensure there's enough slack in the hoses to allow for some movement during operation.

AD

Reconnect the water supply valves and turn them on slowly to check for any leaks around the water connectors. If everything is secure and leak-free, proceed to the final step.

Reconnecting Electrical Power

After verifying that the water connections are secure and leak-free, reconnect the electrical power to your Samsung washer. Plug the washer back into the outlet or flip the circuit breaker back to the 'on' position.

Take a moment to inspect the installation and ensure everything looks secure and well-aligned. Double-check that all hoses are properly connected, and there are no apparent leaks or issues.

Congratulations! You've successfully installed your Samsung washer pedestal. Give your new setup a test run, and revel in the added convenience and style it brings to your laundry space.

AD