Step-by-Step Guide: How to Install Samsung Washer and Dryer
So, you've decided to upgrade your laundry space with a sleek Samsung washer and dryer duo? Great choice! These high-efficiency appliances aren't just stylish; they also help you save water and energy. But before you can enjoy their benefits, you'll need to install them properly. Let's guide you through the process, step by step.
Before we dive in, let's ensure you have all the necessary tools and materials: a screwdriver, a drill (if walls are concrete), a pipe wrench, teflon tape, and, of course, your new Samsung washer and dryer. Once you're all set, let's get started!
Preparation and Safety
First things first, ensure you've turned off the power and water supply to the dryer and washer. For the power, locate your home's electrical panel and switch off the dedicated circuit for your laundry room. For the water, turn off the valves behind the washer and turn on both faucets to relieve any pressure.
Lastly, if your old appliances are connected to a gas line, and your new ones are too, ensure you've also turned off the gas supply and allowed the gas to vent out by running the dryer on a high heat setting for about five minutes before uninstalling the old dryer.
Uninstalling Old Appliances
Now, let's free up space for your new Samsung duo. Start with the washer. Turn it off and unplug it. Then, disconnect the hot and cold water supply lines and the drain hose. Next, remove any mounting screws and, if necessary, unbolt the washer from the floor. Now, it's time for the dryer. Unplug it, disconnect the electric or gas supply, and remove the exhaust duct and any mounting screws.
With both appliances uninstalled, clean the space thoroughly to prepare for your new Samsung washer and dryer. If necessary, repair or replace any damaged surfaces to ensure a secure and level installation.
Positioning and Leveling
Before installing the new appliances, decide on their orientation. Conventional setups have the washer on the left and the dryer on the right. However, consider your specific layout and which direction the water and electrical connections point. Once you've decided, position your new Samsung washer and dryer in place.
Next, ensure your appliances are level. Unbalanced washers and dryers can lead to noise, vibration, and improper operation. Use shims under the feet of your appliances to achieve the perfect level. For Samsung's, the level should not exceed +/- 5mm.
Installing the Washer
Now that your Samsung washer is in place, let's connect the water supply and drain lines. First, install the hot and cold water valves. These come with your washer and should be wall-mounted where your old valves were. Use the provided mounting screws and ensure they're securely fastened.
Next, connect the water supply lines. Samsung washers come with stainless steel braided hoses. Connect one end to the water valves and the other to your washer. Secure them using a pipe wrench, ensuring no leaks occur. Finally, connect the drain hose to the washer and either a floor drain or an elevated standpipe.
Installing the Drain Hose Support
Samsung washers need a drain hose support to keep the hose kiss-curled, preventing kinks that could cause drainage issues. The support comes with your washer. Install it on the wall near the washer, ensuring the provided drainage guidelines are followed.
For top-loading washers, the ideal height between the washer and the drain hose support is around 29 inches. For front-loading washers, it's around 32-34 inches. Adjust the height of the drain hose support accordingly, then secure it to the wall using provided hardware.
Connecting the Power Supply
Samsung washers need a dedicated 125V, 30A circuit for proper operation. Run a new cable from your home's electrical panel to the washer's power connection. Use appropriate wire (No. 12 AWG for 20A and No. 10 AWG for 30A) and ensure it's securely fastened. Once connected, turn on the power at the panel and test your washer.
Installing the Dryer
With your Samsung washer set up, let's move on to the dryer. First, ensure you have the proper electrical or gas connection. For electric dryers, a dedicated 240V, 30A circuit is required. For gas dryers, the gas supply line should be at least 3/8 inches in diameter and located within 3 feet of the dryer.
Position your dryer in place, ensuring it's level and secure. Then, connect the power or gas supply. For electric dryers, run a new cable from your home's electrical panel to the dryer's power connection, using appropriate wire. For gas dryers, connect the gas supply line to the dryer using a gas coupling and ensure it's securely fastened.
Installing the Exhaust Duct
The exhaust duct is crucial for venting warm, moist air out of your dryer. For condensing dryers, no duct is needed. For vented dryers, Samsung recommends using a 4-inch aluminum duct. Connect one end to the dryer's exhaust port and the other to a vent terminal on an outside wall. Ensure the duct is securely fastened and runs in a straight line to minimize resistance.
If your dryer vent route is longer than 25 feet, consider installing a booster fan to help venting. Also, ensure all vent terminals are tightly sealed to prevent moisture and lint from entering your home. Regularly clean the exhaust duct to prevent lint buildup, which could cause fires.
Wiring the Dryer's Thermal Cut-off Switch
Safety first! Samsung dryers come with a thermal cut-off switch. This switch should be installed in the exhaust duct within 12 inches of the dryer. Wiring instructions vary depending on your dryer model, so consult your installation manual for specific details. Once installed, test the switch to ensure it's functioning correctly.
And there you have it! Your new Samsung washer and dryer are now installed and ready to serve you. Remember, regular maintenance is key to keeping your appliances running smoothly. So, don't forget to clean the lint filter after each use, clean the exterior of your dryer regularly, and keep the exhaust duct clear. Happy laundry days ahead!