How to Install an RV Slide Out Awning: Step-by-Step Guide
Imagine stepping into your RV after a long day of adventure, ready to relax under the shade of your slide-out awning. Installing an RV slide-out awning is more than just an addition to your RV; it's an investment in comfort and convenience. Let's guide you through this uncomplicated process.
An RV slide-out awning can dramatically enhance your outdoor living space, providing shade and protection from the elements. Before you begin, make sure you have all the necessary tools and parts, including the awning itself, mounting brackets, screws, screwdriver, drill, and safety glasses.
Preparation and Measurement
Before you start, ensure your awning is suited to your RV's dimensions. Measure the side of your RV from the ground to theriee above where you want the awning's top to be. The awning's width should cover the desired area, typically from the RV's edge to just beyond the wheel well. Also, measure the height of the awning.
Mark the vertical location on your RV where you want the awning to be positioned. Use a level to mark a horizontal line across your RV's side wall for the top edge of your awning. This step ensures a straight installation.
Mounting Brackets
Start by securing the mounting brackets to the RV. Position the brackets along your marked line, one at each end of the awning and one in the middle, evenly spaced. Use a drill to make pilot holes, then attach the brackets using the provided screws.
Once secured, double-check that the brackets are level. If not, adjust the brackets until they are. This ensures a straight installation and smooth awning operation.
Installing the Awning
Now that your brackets are secured, you can install the awning. Unroll the awning from its box and lay it out flat. Attach the awning fabric to the roller tube, ensuring the correct side faces out. Roll the awning back onto the tube.
Align the roller tube with the brackets, then secure it to the brackets using the provided screws. Ensure the awning operates smoothly and is level. It should roll out and in easily without catching or binding.
Testing and Maintenance
After installing, it's crucial to test the awning. Extend it fully, ensure it rolls out and in smoothly, and check if it's secure and level. If anything feels off, adjust and retest until it's right.
Once you're happy with the installation, maintain your awning by occasionally cleaning it with mild soap and water, and storing it properly when not in use. Inspect it for any signs of wear or tear and address any issues promptly.
Safety and Cautions
When extending or retracting the awning, avoid touching the fabric as it rolls. The tension can cause the fabric to flip back and potentially cause injury. Always use the winder handle to operate the awning.
Never extend the awning in high winds or bad weather. Not only can this cause damage to the awning, but it could also pose a safety risk. Always ensure the awning is fully retracted when you're on the move or in adverse weather conditions.
With your new slide-out awning installed, you're ready to enjoy a shady haven after your adventures. Regular maintenance and safe use practices will ensure your awning remains a superior companion on your travels. Happy camping!