how to install ring doorbell wired

How to Install Ring Doorbell Wired: Step-by-Step Guide

By Melissa Hernandez
AD

Are you ready to enhance your home security and convenience with the Ring Video Doorbell? Installing the Ring Doorbell wired is a straightforward process that allows you to always stay connected and keep an eye on your home. This guide will walk you through the process, ensuring a smooth and secure installation.

Before we start, ensure you have the following tools and materials: a Ring Video Doorbell (of course!), a screwdriver, electrical wire connectors, and a wire stripper. It's also a good idea to have a ladder handy for reaching high areas. Now, let's dive into the installation process.

Preparing Your Existing Door Chime Wiring

The first step in installing your Ring Video Doorbell wired is to understand your existing doorbell wiring. Most homes have a two-wire system: one wire for power and one for the chime. In some older homes, you might find a three-wire system, with an additional wire for the LED light.

AD
How To Install a Ring Video Doorbell Wired - From an Electrician
How To Install a Ring Video Doorbell Wired - From an Electrician
How to Physically Install Ring Video Doorbell (2nd Generation) with an Existing Doorbell
How to Physically Install Ring Video Doorbell (2nd Generation) with an Existing Doorbell
a person pointing at an electrical outlet on a wall
a person pointing at an electrical outlet on a wall

Using a multimeter, test your wires to ensure you understand their function. The power wire is usually around 16 to 24 volts AC, while the other wire is for the chime and carries a voltage of 10 to 40V AC or 16 to 30V DC. Be cautious when handling these wires, as they can cause electrical shocks.

Disconnecting Your Existing Doorbell

Once you've identified the wires, safely disconnect your existing doorbell by removing its faceplate and unscrewing it from the mounting plate. Carefully unclip the wires from the back of the doorbell and disconnect them.

How to Install Ring Doorbell Wired | Ring
How to Install Ring Doorbell Wired | Ring
Wiring diagrams for battery-powered doorbells
Wiring diagrams for battery-powered doorbells

Now, carefully remove the doorbell from its mounting position. If it's screwed into the wall or door frame, use your screwdriver to remove the screws. Be gentle to avoid damaging the wires or the wall.

Preparing Your Ring Video Doorbell

Before installing the Ring Video Doorbell, ensure it's turned off and disconnected from the app. Remove the faceplate by lightly pressing the tabs on the sides and sliding it off. You'll see two screw holes where you'll attach the mounting bracket.

AD

Next, install the lynch pin by aligning the holes and pressing the pin until it clicks into place. If you're installing the doorbell upside down, make sure the arrow on the pin points upwards. Now, your Ring Video Doorbell is ready to be attached to the mounting bracket.

Wiring Your Ring Video Doorbell

With your Ring Video Doorbell prepared, it's time to wire it to your existing doorbell system. Begin by pushing the mounting bracket onto the back of the doorbell, ensuring the screws align with the holes. Secure it in place using the provided screws.

Now, identify the wire terminals on the mounting bracket: one for the power wires (usually brown or black) and one for the-door wires (usually blue or white). Carefully connect the wires from your home's existing doorbell system to the appropriate terminals. Make sure the connections are secure and that the brake connections are safely closed to prevent any short circuit.

AD

Connecting Your Existing Doorbell Button

With the Ring Video Doorbell wired, it's time to connect your existing doorbell button. Remove the button's cover and disconnect the wires. Connect these wires to the green ('GND'), yellow ('VAL'), and white ('DOOR') wire terminals on the mounting bracket, ensuring they match the correct terminals on the button.

Secure the mounting plate in place using the provided screws, aligning it with the wall or door frame. Ensure that the plate is securely attached to prevent any movements that could loosen the wire connections.

Testing Your Ring Video Doorbell

Before reinstalling the faceplate, test your Ring Video Doorbell to ensure it's working correctly. Press the button on your existing doorbell. If everything is wired correctly, the chime should ring, and the light on the Ring Video Doorbell should illuminate.

AD

If you have a Ring Chime Pro, connect it to your home's Wi-Fi network, and it will replace your traditional chime as a Wi-Fi bridge for your Ring devices.

Congratulations! You've successfully installed your Ring Video Doorbell wired and enhanced your home security. Now, finish the installation by reinstalling the faceplate and enjoying the peace of mind that comes with always knowing who's at your door. Don't forget to download the Ring app and set up your new device to start receiving notifications and monitoring your home in real-time.

AD