Step-by-Step: How to Install Pikepass Sticker
Installing a New Pikepass Sticker
Preparing the Windshield
- Wash your windshield thoroughly with soap and water to remove any dirt, grime, or wax.
- Dry the glass completely with a lint-free cloth. Any remaining moisture can prevent the sticker from adhering properly.
Applying the Sticker
- Hold the sticker by the carrier sheet and position it on the windshield, aligning it with the other Pikepass stickers (if applicable).
- Slowly peel off the sticker from the carrier sheet, using a squeegee or credit card to press down firmly and smooth out any bubbles or wrinkles.
- Start from the center and work your way out to the edges, pushing out air bubbles and ensuring the sticker adheres evenly.
Replacing a Pikepass Sticker
Cleaning the Windshield
- Use a glass cleaner or isopropyl alcohol to gently rub the windshield where the old sticker was.
- If needed, use a razor blade to carefully scrape off any stubborn adhesive. Be cautious not to scratch the glass.
- Wash and dry the area as you normally would, ensuring it's free of moisture before applying the new sticker.