How to Install Night Sights on Glock
Embarking on upgrading your Glock with night sights? You've chosen a practical and rewarding enhancement that'll significantly boost your shooting prowess in low-light conditions. This comprehensive guide walks you through installing night sights on your Glock step-by-step, ensuring a seamless, accurate process. Let's dive in!
Before we commence, ensure you have the right tools and equipment: your Glock, a night sight kit (compatible with your Glock model), a flathead screwdriver, a punch set, a hammer, a pin vise, and patience.
Preparation and Disassembly
The initial phase involves meticulously disassembling your Glock. Secure a safe environment, and adhere to strict gun safety rules. Never assume a firearm is unloaded; always check and double-check.
Using your flathead screwdriver, remove the grip panels. Then, with the takedown lever in the down position, rotate the trigger group downwards and slide it out. Pop out the connector, remove the trigger bar, and the trigger itself. Keep track of these tiny components!
Removing the Old Sights
With the slide off, we'll tackle the factory sights. Push out the spring-loaded sight pins using your punch set and hammer. Once done, slide out the old sights.
If your Glock came with standard metal sights, you're all set. If it had night sights pre-installed, ensure the new ones are a perfect fit.
Installing the New Front Sight
Assuming your new front sight accommodates retaining screws, locate these and apply a small amount of grease. Thread the front sight onto the dovetail, Then gently tap it home using your hammer. Ensure it's driven only enough to engage the retaining screws.
Once in place, apply a drop of Loctite on each retaining screw, then fully tighten them. Wipe any excess grease or Loctite from the sight using a clean, dry cloth. Maintain a consistent 6 o'clock holdover when testing.
Installing the New Rear Sight
Now, let's install the rear sight. Like the front sight, apply a drop of grease to the dovetail. If your night sight comes with a detent, position it on the corresponding hole on your Glock's dovetail.
Tactfully align and tap your new rear sight onto the dovetail. Use your punches to tap the remaining sight pin through. Test for smooth movement along the dovetail and the pin.
Reassembling and Testing
Reassemble your Glock, ensuring all parts are reinstalled correctly. Cycle the slide a few times to ensure smooth operation. Remember, it might take a few shots to settle in perfectly.
Take your Glock to the range and test your new night sights. Adjust your sight picture as needed. Once dialed in, you're now equipped with a formidable low-light shooter!
Regular cleaning and maintenance will keep your Glock's night sights functioning optimally. Keep an eye out for any anomalies and address them promptly. Happy shooting! Now that you've mastered installing night sights, consider exploring other Glock upgrades to further enhance your firearm's capabilities.