how to install motorcycle grips

Step-by-Step Guide: How to Install Motorcycle Grips

By Melissa Martin
AD

Tired of slippery hands on your motorcycle? Upgrading your grips can enhance comfort, control, and your overall riding experience. This guide will walk you through how to install motorcycle grips safely and effectively. With the right tools and a bit of patience, you'll be back on the road in no time.

Before we dive into the process, ensure you've selected the right grips for your motorcycle. Compatibility is key, so check your bike's make, model, and current grip dimensions. Consider different materials like rubber, silicone, or gel for varying levels of grip and comfort.

Preparation and Tools

Before you start, gather your tools and materials. You'll need:

AD
How to Replace Motorcycle Grips
How to Replace Motorcycle Grips
How to Install New Motorcycle Handlebar Grips
How to Install New Motorcycle Handlebar Grips
How to Replace Grips on a Harley-Davidson by J&P Cycles
How to Replace Grips on a Harley-Davidson by J&P Cycles
  • New motorcycle grips
  • Degreaser or grip cleaner
  • Rag or towel
  • Wire stripper (if your grips have internal wires)
  • Grip installer tool (optional, but helpful)
  • Screwdriver (if your grips have Allen keys or hex screws)

Now, find a well-lit, flat workspace to work on your bike. It's time to get your hands dirty.

Removing Old Grips

Start by removing the bar-end plugs or end weights at both ends of the handlebars. These may twist off or require a hex key. Once removed, shift the old grip slightly to expose the wiring connections. Using a wire stripper, carefully expose about an inch of the wire's inner core. Do this for both grips.

How to Install New Motorcycle Handlebar Grips
How to Install New Motorcycle Handlebar Grips
How to Install New Grips on an Electra Glide
How to Install New Grips on an Electra Glide

Next, clean the old grips and handlebars. Apply a degreaser or grip cleaner to the old grips and let it soak for a few minutes. Using a rag or towel, thoroughly clean both the grips and handlebar surfaces. This step ensures a good fit and adhesion for your new grips.

Preparing New Grips

Unwrap your new grips and inspect them. If they're wrapped in plastic or have protective coatings, remove them. Some grips might come with a small bottle of adhesive; if yours does, set it aside for later use.

AD

If your new grips have internal wires, strip about an inch of the outer casing, similar to the old grips. This allows for a firm connection and prevents the internal wires from being pinched when you install the new grips.

Installing New Grips

Now that your workspace and tools are clean and organized, let's install those new grips.

Start by attaching one end of the new grip to the handlebar. You can use a small amount of adhesive if provided with the grips, or simply start pulling the grip onto the bar. Ensure the grip is aligned correctly, with the logos facing out and the wire tucked inside.

AD

Slipping on the Grips

Begin installing the grip from the center of the handlebar, pulling outward. If you're using a grip installer tool, insert it into the grip's inner hole and gently twist and pull. The tool provides better leverage and helps prevent overextending the grip's material.

As you're pulling, be mindful of the wiring. Keep it away from the grip's edge to avoid pinching or damaging it. Continue pulling until the grip reaches the end of the handlebar. If there's any excess grip material sticking out, trim it cleanly.

Securing the Grips

Once both grips are installed, reattach the bar-end plugs or end weights. Ensure they're securely fastened using the appropriate tool. If your grips have any screws or Allen keys, tighten them gently but firmly to secure the grips in place.

AD

Finally, check your work. Give the grips a gentle tug to ensure they're secure. Wiggle your thumbs and fingers to see if they're well-positioned for optimal control. You've done it! Your motorcycle now has a fresh pair of grips, enhancing your comfort and ride experience.

Lastly, consider lubing your chain and giving your bike a quick wash to keep it looking and running at its best. Happy riding!

AD