how to install heat strips in air handler

Mastering HVAC: Step-by-Step Guide to Install Heat Strips in Your Air Handler

By Anthony Lee
AD

Installing heat strips in an air handler can significantly improve your home's heating efficiency and comfort, especially during colder months. This guide walks you through the process in simple, step-by-step instructions, ensuring an accurate and safe installation.

Before you start, gather your materials and ensure you have a clear understanding of your air handler unit. This guide assumes you're working with a standard 120-volt, 20-amp heat strip, typically used in residential air handlers.

Preparation and Safety Measures

Installing heat strips involves electrical work, so safety is paramount. Always turn off the power at the circuit breaker before starting and test the wires with a non-contact voltage tester to ensure they're dead.

AD
MRCOOL 5 KW Central Ducted Air Handler Heat Strip 21.06-in W x 8.03-in H Central Air Conditioners Heat Strip one_size | CENTRALHK05
MRCOOL 5 KW Central Ducted Air Handler Heat Strip 21.06-in W x 8.03-in H Central Air Conditioners Heat Strip one_size | CENTRALHK05
MRCOOL 20KW Central Ducted Air Handler Heat Strip 21.06-in W x 8.03-in H Central Air Conditioners Heat Strip one_size | CENTRALHK20
MRCOOL 20KW Central Ducted Air Handler Heat Strip 21.06-in W x 8.03-in H Central Air Conditioners Heat Strip one_size | CENTRALHK20
Goodman SmartFrame Heat Strips 5 kW HKSC05XC 208/240V
Goodman SmartFrame Heat Strips 5 kW HKSC05XC 208/240V

Gather your materials: heat strips, volt-ampere (VA) rating, wire connectors, electrical tape, screwdriver, and pliers.

Understanding Your Air Handler and Heat Strip

Familiarize yourself with your air handler unit. Locate the blower motor, which is where you'll install the heat strips. Identify the terminal screws on the sides of the motor, typically labeled as 'HSI' (Heat Strike Input) and 'COM' (Common).

Heat Helper
Heat Helper

The heat strip's voltage and ampere rating must match your air handler's requirements. Mis-matched ratings can cause overheating, damage, or inadequate heating. Also, ensure the heat strip's width matches your air handler's blower motor.

Installing the Heat Strips

Unscrew the terminal screws partially. Unravel the heat strips and identify the ends marked 'black' and 'red'. Connect the black wire to the 'COM' terminal of the blower motor, and the red wire to the 'HSI' terminal. Tighten the screws securely but avoid over-tightening.

AD

Route the heat strips along the underside of the blower motor, ensuring they're not in contact with any moving parts or obstructions. Secure the strips using the provided brackets or clips, if available, and use electrical tape for extra support if needed.

Testing and Final Touches

Reconnect the power at the circuit breaker. Turn on the heating system and your air handler. Listen for the blower motor to start, and you should smell the heat strips heating up shortly after. If you hear any unusual noises or don't feel heat within a few minutes, turn off the system and check your connections.

Always double-check your work. Ensure all wires are securely connected, and there are no loose or exposed wires. Runtime diagnostics to confirm your heat strips are functioning correctly.

AD

With proper maintenance, your newly installed heat strips should provide years of effective and efficient heating. If you encounter any issues or have doubts about your installation, consult a professional HVAC technician for assistance. Happy heating!

AD