how to install fenders on a trailer

Mastering Trailer Fenders: A Step-by-Step Guide to Installation

By Michael Jones
AD

Installing fenders on a trailer is not only an aesthetic upgrade but also a practical one, protecting your trailer and cargo from debris, mud, and water kicked up from the road. Here's a step-by-step guide to help you install fenders on your trailer with ease.

Before you start, ensure you have the necessary tools and components. You'll need a fender kit, which usually includes fenders, hangers, hardware, and screws. You'll also need a drill, screwdriver, ratchet set, measuring tape, and possibly a Gareth tool for assembly.

Planning Your Fender Installation

Before you begin installation, plan where you want your fenders to go. Generally, fenders should cover at least 75% of your tire width to be effective. Measure the width of your tires and use this measurement to mark where you want your fenders to be placed.

AD
Boat Fender, DIY
Boat Fender, DIY
Trailer Fenders. How we made new fenders for our trailer
Trailer Fenders. How we made new fenders for our trailer
How-to: Install Motobilt Heavy Duty Trailer Fender Kit
How-to: Install Motobilt Heavy Duty Trailer Fender Kit

Consider the height of your fender as well. The fender should be high enough to protect the bottom of your vehicle but not so high that it interferes with your vehicle's suspension or exhaust system. Mark this height as well.

Gathering Your Materials

Once you've planned your fender placement, gather your materials. Your fender kit should include everything you need, but it's a good idea to double-check. You may need to purchase additional hardware if your kit doesn't include enough screws or your trailer requires specific hardware.

Everlast Trailer Project Build Part 6: Floor and Fender time.
Everlast Trailer Project Build Part 6: Floor and Fender time.

Ensure you have all the necessary tools as well. In addition to the tools listed earlier, you may also need a center punch, a tape measure, and possibly a file or deburring tool to clean up any rough edges on your fenders.

Preparing Your Trailer

Before you start installing fenders, make sure your trailer is clean and free of any debris or rust. This will make it easier to install the fenders and ensure a strong bond with the trailer body.

AD

If your trailer has any rust, you'll need to remove it or treat it before installation. Rust can compromise the strength of your fender and cause it to fail over time.

Installing Your Fenders

Now that you've planned your fender placement, gathered your materials, and prepared your trailer, it's time to install your fenders.

Start by attaching the hangers to the bottom of your fender. Most fender kits come with two types of hangers: tension hangers and bolt-on hangers. Tension hangers use a spring-loaded mechanism to grip the fender in place, while bolt-on hangers require you to drill holes through the fender and attach them with screws.

AD

Installing Tension Hangars

Tension hangers are typically easier to install as they don't require drilling into the fender. To install a tension hangar, simply slip it onto the bottom of the fender and it will snap into place. If you're having trouble, you can use a Gareth tool to assist with the process.

Once the hangar is in place, position your fender on your trailer according to your planned placement. Secure the hangar to the trailer using the provided hardware. Make sure the hangar is level and the fender is perpendicular to the trailer's side to ensure proper protection and appearance.

Installing Bolt-On Hangars

Bolt-on hangars require a bit more work, as you'll need to drill holes into the fender. Before you start drilling, use your tape measure to mark the correct placement for your holes. These hangars often come with specialized drill bits that match the diameter of their bolts.

AD

Drill the holes, then attach the hangar to the fender using the provided bolts. Position the fender on your trailer and secure the hangar to the trailer using the provided hardware. As with tension hangars, ensure the hangar is level and the fender is perpendicular to the trailer's side.

Securing Your Fenders

Once your fenders are in place, use the provided screws to secure them to the trailer. Most fender kits come with self-drilling screws, which can be screwed directly into the trailer without predrilling. If your kit doesn't include these screws, you'll need to predrill holes to prevent the fender from splitting.

Use your ratchet set to tighten the screws securely, but be careful not to overtighten and strip the screw holes. If a screw hole strips, you may need to use a longer screw or fill the hole with a suitable filler before attempting to reinstall the screw.

Congratulations, you've successfully installed fenders on your trailer! With these new fenders, you can now protect your trailer and cargo from debris and water on the road. Enjoy your driving experience, and don't forget to regularly inspect your fenders for any damage or wear. Happy travels!

AD