How to Install a Double Sink Drain
Installing a double sink drain might seem daunting, but with the right guidance, this task can be accomplished with DIY prowess. A double sink drain, also known as a dual drain or two-bowl drain, is ideal for households with high water demand. It allows you to run the dishwasher while someone's washing dishes, or let the disposal run for longer periods without backing up. So, let's dive into the step-by-step process of installing a double sink drain.
Before we proceed, ensure you have the necessary tools and materials. You'll need a new double bowl sink and drain assembly, plumber's putty, a basin wrench, a set of adjustable wrenches, a hacksaw, and a tube cutter. Safety glasses and gloves are also recommended. Always remember to turn off the water supply and electricity before starting any plumbing work.
Preparing the Workspace
Begin by turning off both the hot and cold water supplies to the sink. Typically, these connectors are found under the sink or in the cabinet behind the sink. Once the water is off, open the faucets to release any residual water pressure in the lines.
Next, disconnect the drain and supply lines from the current sink. If the sink is already installed, you'll need to remove it first. Use the basin wrench to loosen and remove the drain nuts connecting the sink to the P-trap and drain tailpieces. If your sink is not yet installed, skip this step and proceed to remove the existing drain assembly.
Removing the Existing Drain
Before removing the drain assembly, mark the location of the polyvinyl chloride (PVC) pipes to ensure they are reinstalled in the correct spot. Then, disconnect the PVC drain lines from the wall or the main drain stack. Use a hacksaw or tube cutter to cut the PVC pipes if they need to be extended or modified.
Once the pipes are disconnected, remove the drain flange and the existing drain basket. You might need to use pliers to break the seal between the drain and the sink. Be careful not to damage the sink. If the seal is made of a putty-like substance, you can scrape it off with a putty knife.
Installing the New Drain Assembly
Start by ensuring the new drain assembly is exactly where you want it. It's common to have studs or other obstacles that might interfere with the install, so make sure there's enough space for hands and tools to work comfortably. Also, verify that the holes in the new sink match the drain assembly's dimensions.
Once you've verified the fit, apply a generous amount of plumber's putty to the underside of the drain flange. Press the new drain assembly firmly into the sink's drain hole, twisting slightly to create a good seal. Wipe away any excess putty that squeezes out from under the flange.
Installing the Sink
If you haven't already done so, apply plumber's putty to the underside of the new sink's drain hole. Then, place the sink into position, aligning the drain hole with the new drain assembly. Gently press down on the sink to create a good seal with the putty. Be careful not to move the sink once it's in position.
Now, hand-tighten the new drain nuts that came with the double sink drain kit. Use a basin wrench to snug them up, but avoid overtightening. Remember, you can always tighten them later if necessary, but overtightening can strip the threads or damage the sink.
Reinstalling the Drain and Supply Lines
Reattach the drain lines from the wall or main drain stack to the new tailpieces under the sink. Ensure the connections are tight by hand, and then use adjustable wrenches to snug them up. Be careful not to overtighten PVC connections, as they can break or crack.
Now, reconnect the supply lines to the new faucets. Make sure the hot and cold lines are connected to the correct faucet. Once again, snug them by hand and then secure them with adjustable wrenches. Be sure to turn on the water supply valves gradually to prevent excessive water pressure from damaging the new lines.
Finishing Up
Turn on the water supply valves completely and check for any leaks. Before turning on the electricity to the garbage disposal and faucet, test them for functionality and observe if there are any leaks around the connections or under the sink.
After ensuring everything is working correctly, clean up your workspace. It's recommended to wait a few hours before using the sink to allow the putty to cure and create a strong seal. And you're done! You've successfully installed a double sink drain. This setup will not only make your kitchen more efficient but also add value to your home.
Regular maintenance, such as cleaning the drains and running water occasionally when not in use, can help extend the lifespan of your double sink drain. Now, go ahead and enjoy the convenience of your new setup. Just remember, while it might be tempting to put everything down the disposal, avoid doing so to prevent any potential blockages or damage.